|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | VARIABLES | ENVIRONMENT VARIABLES | NOTES | SEE ALSO | COLOPHON |
|
|
|
VGCFGRESTORE(8) System Manager's Manual VGCFGRESTORE(8)
vgcfgrestore — Restore volume group configuration
vgcfgrestore option_args position_args
[ option_args ]
[ position_args ]
--commandprofile String
--config String
-d|--debug
--devices PV
--devicesfile String
--driverloaded y|n
-f|--file String
--force
-h|--help
--journal String
-l|--list
--lockopt String
--longhelp
-M|--metadatatype lvm2
--nohints
--nolocking
--profile String
-q|--quiet
-t|--test
-v|--verbose
--version
-y|--yes
vgcfgrestore restores the metadata of a VG from a text back up
file produced by vgcfgbackup. This writes VG metadata onto the
devices specified in back up file.
A back up file can be specified with --file. If no backup file
is specified, the most recent one is used. Use --list for a list
of the available back up and archive files of a VG.
WARNING: When a VG contains thin pools, changes to thin metadata
cannot be reverted, and data loss may occur if thin metadata has
changed. The force option is required to restore in this case.
Restore VG metadata from last backup.
vgcfgrestore VG
[ COMMON_OPTIONS ]
—
Restore VG metadata from specified file.
vgcfgrestore -f|--file String VG
[ COMMON_OPTIONS ]
—
List all VG metadata backups.
vgcfgrestore -l|--list VG
[ COMMON_OPTIONS ]
—
List one VG metadata backup file.
vgcfgrestore -l|--list -f|--file String
[ COMMON_OPTIONS ]
[ VG ]
—
Common options for command:
[ -M|--metadatatype lvm2 ]
[ --force ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override
lvm.conf(5) settings. The String arg uses the same format
as lvm.conf(5), or may use section/field syntax. See
lvm.conf(5) for more information about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the
detail of messages sent to the log file and/or syslog (if
configured).
--devices PV
Devices that the command can use. This option can be
repeated or accepts a comma separated list of devices.
This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must
exist in /etc/lvm/devices/ and is managed with the
lvmdevices(8) command. This overrides the lvm.conf(5)
devices/devicesfile and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-
mapper. For testing and debugging.
-f|--file String
Read metadata backup from the named file. Usually this
file was created by vgcfgbackup.
--force ...
Force metadata restore even with thin pool LVs. Use with
extreme caution. Most changes to thin metadata cannot be
reverted. You may lose data if you restore metadata that
does not match the thin pool kernel metadata precisely.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This
information is in addition to information enabled by the
lvm.conf log/journal setting. command: record information
about the command. output: record the default command
output. debug: record full command debugging.
-l|--list
List metadata backup and archive files pertaining to the
VG. May be used with --file. Does not restore the VG.
--lockopt String
Used to pass options for special cases to lvmlockd. See
lvmlockd(8) for more information.
--longhelp
Display long help text.
-M|--metadatatype lvm2
Specifies the type of on-disk metadata to use. lvm2 (or
just 2) is the current, standard format. lvm1 (or just 1)
is no longer used.
--nohints
Do not use the hints file to locate devices for PVs. A
command may read more devices to find PVs when hints are
not used. The command will still perform standard hint
file invalidation where appropriate.
--nolocking
Disable locking.
--profile String
An alias for --commandprofile or --metadataprofile,
depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and
--verbose. Repeat once to also suppress any prompts with
answer 'no'.
-t|--test
Run in test mode. Commands will not update metadata. This
is implemented by disabling all metadata writing but
nevertheless returning success to the calling function.
This may lead to unusual error messages in multi-stage
operations if a tool relies on reading back metadata it
believes has changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase
the detail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always
assume the answer yes. Use with extreme caution. (For
automatic no, see -qq.)
VG Volume Group name. See lvm(8) for valid names.
String See the option description for information about the
string content.
Size[UNIT]
Size is an input number that accepts an optional unit.
Input units are always treated as base two values,
regardless of capitalization, e.g. 'k' and 'K' both refer
to 1024. The default input unit is specified by letter,
followed by |UNIT. UNIT represents other possible input
units: b|B is bytes, s|S is sectors of 512 bytes, k|K is
KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E
is EiB. (This should not be confused with the output
control --units, where capital letters mean multiple of
1000.)
See lvm(8) for information about environment variables used by
lvm. For example, LVM_VG_NAME can generally be substituted for a
required VG parameter.
To replace PVs, vgdisplay --partial --verbose will show the UUIDs
and sizes of any PVs that are no longer present. If a PV in the
VG is lost and you wish to substitute another of the same size,
use pvcreate --restorefile filename --uuid uuid (plus additional
arguments as appropriate) to initialise it with the same UUID as
the missing PV. Repeat for all other missing PVs in the VG. Then
use vgcfgrestore --file filename to restore the VG's metadata.
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8),
pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8),
vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8),
vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8),
vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8),
lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8),
lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8),
cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7),
lvmthin(7), lvmvdo(7), lvmautoactivation(7)
This page is part of the lvm2 (Logical Volume Manager 2) project.
Information about the project can be found at
⟨http://www.sourceware.org/lvm2/⟩. If you have a bug report for
this manual page, see ⟨https://github.com/lvmteam/lvm2/issues⟩.
This page was obtained from the project's upstream Git repository
⟨git://sourceware.org/git/lvm2.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-11.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Red Hat, Inc. LVM TOOLS 2.03.25(2)-git (2024-05-16) VGCFGRESTORE(8)
Pages that refer to this page: lvchange(8), lvconvert(8), lvcreate(8), lvdisplay(8), lvextend(8), lvm(8), lvmconfig(8), lvmdevices(8), lvmdiskscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgconvert(8), vgcreate(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|