|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | SEE ALSO | BUGS | ACKNOWLEDGEMENTS | COLOPHON |
|
|
|
SLAPD(8C) SLAPD(8C)
slapd - Stand-alone LDAP Daemon
LIBEXECDIR/slapd [-V[V[V]] [-4|-6] [-T {acl|a[dd]|auth|c[at]|
d[n]|i[ndex]|m[odify]|p[asswd]|s[chema]|t[est]}] [-d debug-level]
[-f slapd-config-file] [-F slapd-config-directory] [-h URLs]
[-n service-name] [-s syslog-level] [-l syslog-local-user]
[-o option[=value]] [-r directory] [-u user] [-g group]
[-c cookie]
Slapd is the stand-alone LDAP daemon. It listens for LDAP
connections on any number of ports (default 389), responding to
the LDAP operations it receives over these connections. slapd is
typically invoked at boot time, usually out of /etc/rc.local.
Upon startup, slapd normally forks and disassociates itself from
the invoking tty. If configured in the config file (or config
directory), the slapd process will print its process ID (see
getpid(2)) to a .pid file, as well as the command line options
during invocation to an .args file (see slapd.conf(5)). If the
-d flag is given, even with a zero argument, slapd will not fork
and disassociate from the invoking tty.
See the "OpenLDAP Administrator's Guide" for more details on
slapd.
-V[V[V]]
Print version info and proceed with startup. If -VV is
given, exit after providing version info. If -VVV is
given, additionally provide information on static overlays
and backends.
-4 Listen on IPv4 addresses only.
-6 Listen on IPv6 addresses only.
-T tool
Run in Tool mode. The tool argument selects whether to run
as slapadd, slapcat, slapdn, slapindex, slapmodify,
slappasswd, slapschema, or slaptest (slapacl and slapauth
need the entire acl and auth option value to be spelled
out, as a is reserved to slapadd). This option should be
the first option specified when it is used; any remaining
options will be interpreted by the corresponding slap tool
program, according to the respective man pages. Note that
these tool programs will usually be symbolic links to
slapd. This option is provided for situations where
symbolic links are not provided or not usable.
-d debug-level
Turn on debugging as defined by debug-level. If this
option is specified, even with a zero argument, slapd will
not fork or disassociate from the invoking terminal. Some
general operation and status messages are printed for any
value of debug-level. debug-level is taken as a bit
string, with each bit corresponding to a different kind of
debugging information. See <ldap_log.h> for details.
Comma-separated arrays of friendly names can be specified
to select debugging output of the corresponding debugging
information. All the names recognized by the loglevel
directive described in slapd.conf(5) are supported. If
debug-level is ?, a list of installed debug-levels is
printed, and slapd exits.
Remember that if you turn on packet logging, packets
containing bind passwords will be output, so if you
redirect the log to a logfile, that file should be read-
protected.
-s syslog-level
This option tells slapd at what debug-level debugging
statements should be logged to the syslog(8) facility.
The value syslog-level can be set to any value or
combination allowed by the -d switch. Slapd logs all
messages selected by syslog-level at the syslog(3)
severity debug-level DEBUG, on the unit specified with -l.
-n service-name
Specifies the service name for logging and other purposes.
Defaults to basename of argv[0], i.e.: "slapd".
-l syslog-local-user
Selects the local user of the syslog(8) facility. Value
can be LOCAL0, through LOCAL7, as well as USER and DAEMON.
The default is LOCAL4. However, this option is only
permitted on systems that support local users with the
syslog(8) facility. Logging to syslog(8) occurs at the
"DEBUG" severity debug-level.
-f slapd-config-file
Specifies the slapd configuration file. The default is
ETCDIR/slapd.conf.
-F slapd-config-directory
Specifies the slapd configuration directory. The default
is ETCDIR/slapd.d. If both -f and -F are specified, the
config file will be read and converted to config directory
format and written to the specified directory. If neither
option is specified, slapd will attempt to read the
default config directory before trying to use the default
config file. If a valid config directory exists then the
default config file is ignored. All of the slap tools that
use the config options observe this same behavior.
-h URLlist
slapd will by default serve ldap:/// (LDAP over TCP on all
interfaces on default LDAP port). That is, it will bind
using INADDR_ANY and port 389. The -h option may be used
to specify LDAP (and other scheme) URLs to serve. For
example, if slapd is given -h "ldap://127.0.0.1:9009/
ldaps:/// ldapi:///", it will listen on 127.0.0.1:9009 for
LDAP, 0.0.0.0:636 for LDAP over TLS, and LDAP over IPC
(Unix domain sockets). Host 0.0.0.0 represents INADDR_ANY
(any interface). A space separated list of URLs is
expected. The URLs should be of the LDAP, PLDAP, LDAPS,
PLDAPS, or LDAPI schemes, and generally without a DN or
other optional parameters (excepting as discussed below).
Support for the latter three schemes depends on selected
configuration options. Hosts may be specified by name or
IPv4 and IPv6 address formats. Ports, if specified, must
be numeric. The default ldap:// port is 389 and the
default ldaps:// port is 636, same for the proxy enabled
variants.
The PLDAP and PLDAPS URL schemes provide support for the
HAProxy proxy protocol version 2, which allows a load
balancer or proxy server to provide the remote client IP
address to slapd to be used for access control or logging.
Ports configured for PLDAP or PLDAPS will only accept
connections that include the necessary proxy protocol
header. Connections to these ports should be restricted at
the network level to only trusted load balancers or
proxies to avoid spoofing of client IP addresses by third
parties.
For LDAP over IPC, name is the name of the socket, and no
port is required, nor allowed; note that directory
separators must be URL-encoded, like any other characters
that are special to URLs; so the socket
/usr/local/var/ldapi
must be specified as
ldapi://%2Fusr%2Flocal%2Fvar%2Fldapi
The default location for the IPC socket is
LOCALSTATEDIR/run/ldapi
The listener permissions are indicated by
"x-mod=-rwxrwxrwx", "x-mod=0777" or "x-mod=777", where any
of the "rwx" can be "-" to suppress the related
permission, while any of the "7" can be any legal octal
digit, according to chmod(1). The listeners can take
advantage of the "x-mod" extension to apply rough
limitations to operations, e.g. allow read operations
("r", which applies to search and compare), write
operations ("w", which applies to add, delete, modify and
modrdn), and execute operations ("x", which means bind is
required). "User" permissions apply to authenticated
users, while "other" apply to anonymous users; "group"
permissions are ignored. For example,
"ldap:///????x-mod=-rw-------" means that read and write
is only allowed for authenticated connections, and bind is
required for all operations. This feature is
experimental, and requires to be manually enabled at
configure time.
-r directory
Specifies a directory to become the root directory. slapd
will change the current working directory to this
directory and then chroot(2) to this directory. This is
done after opening listeners but before reading any
configuration file or initializing any backend. When used
as a security mechanism, it should be used in conjunction
with -u and -g options.
-u user
slapd will run slapd with the specified user name or id,
and that user's supplementary group access list as set
with initgroups(3). The group ID is also changed to this
user's gid, unless the -g option is used to override.
Note when used with -r, slapd will use the user database
in the change root environment.
Note that on some systems, running as a non-privileged
user will prevent passwd back-ends from accessing the
encrypted passwords. Note also that any shell back-ends
will run as the specified non-privileged user.
-g group
slapd will run with the specified group name or id. Note
when used with -r, slapd will use the group database in
the change root environment.
-c cookie
This option provides a cookie for the syncrepl replication
consumer. The cookie is a comma separated list of
name=value pairs. Currently supported syncrepl cookie
fields are rid, sid, and csn. rid identifies a
replication thread within the consumer server and is used
to find the syncrepl specification in slapd.conf(5) or
slapd-config(5) having the matching replication identifier
in its definition. The rid must be provided in order for
any other specified values to be used. sid is the server
id in a multi-provider configuration. csn is the commit
sequence number received by a previous synchronization and
represents the state of the consumer content which the
syncrepl engine will synchronize to the current provider
content. In case of multi-provider replication agreement,
multiple csn values, semicolon separated, can appear. Use
only the rid part to force a full reload.
-o option[=value]
This option provides a generic means to specify options
without the need to reserve a separate letter for them.
It supports the following options:
slp={on|off|slp-attrs}
When SLP support is compiled into slapd, disable it
(off),
enable it by registering at SLP DAs without
specific SLP attributes (on), or with specific SLP
attributes slp-attrs that must be an SLP attribute
list definition according to the SLP standard.
For example, "slp=(tree=production),(server-
type=OpenLDAP),(server-version=2.4.15)" registers
at SLP DAs with the three SLP attributes tree,
server-type and server-version that have the values
given above. This allows one to specifically query
the SLP DAs for LDAP servers holding the production
tree in case multiple trees are available.
To start slapd and have it fork and detach from the terminal and
start serving the LDAP databases defined in the default config
file, just type:
LIBEXECDIR/slapd
To start slapd with an alternate configuration file, and turn on
voluminous debugging which will be printed on standard error,
type:
LIBEXECDIR/slapd -f /var/tmp/slapd.conf -d 255
To test whether the configuration file is correct or not, type:
LIBEXECDIR/slapd -Tt
ldap(3), slapd.conf(5), slapd-config(5), slapd.access(5),
slapacl(8), slapadd(8), slapauth(8), slapcat(8), slapdn(8),
slapindex(8), slapmodify(8), slappasswd(8), slapschema(8),
slaptest(8).
"OpenLDAP Administrator's Guide"
(http://www.OpenLDAP.org/doc/admin/)
See http://www.openldap.org/its/
OpenLDAP Software is developed and maintained by The OpenLDAP
Project <http://www.openldap.org/>. OpenLDAP Software is derived
from the University of Michigan LDAP 3.3 Release.
This page is part of the OpenLDAP (an open source implementation
of the Lightweight Directory Access Protocol) project.
Information about the project can be found at
⟨http://www.openldap.org/⟩. If you have a bug report for this
manual page, see ⟨http://www.openldap.org/its/⟩. This page was
obtained from the project's upstream Git repository
⟨https://git.openldap.org/openldap/openldap.git⟩ on 2024-06-14.
(At that time, the date of the most recent commit that was found
in the repository was 2024-06-13.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
OpenLDAP LDVERSION RELEASEDATE SLAPD(8C)
Pages that refer to this page: ldap(3), ldap_sync(3), lloadd.conf(5), slapd.access(5), slapd-asyncmeta(5), slapd.backends(5), slapd.conf(5), slapd-config(5), slapd-dnssrv(5), slapd-ldap(5), slapd-ldif(5), slapd-mdb(5), slapd-meta(5), slapd-monitor(5), slapd-null(5), slapd.overlays(5), slapd-passwd(5), slapd-perl(5), slapd.plugin(5), slapd-relay(5), slapd-sock(5), slapd-sql(5), slapd-wt(5), slapo-chain(5), slapo-dds(5), slapo-dynlist(5), slapo-homedir(5), slapo-memberof(5), slapo-nestgroup(5), slapo-pbind(5), slapo-pcache(5), slapo-remoteauth(5), slapo-retcode(5), slapo-rwm(5), slappw-argon2(5), automount(8), lloadd(8), slapacl(8), slapadd(8), slapauth(8), slapcat(8), slapdn(8), slapindex(8), slapmodify(8), slappasswd(8), slapschema(8), slaptest(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|