|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OFFLINE COMMANDS | OPTIONS | AUTHOR | COPYRIGHT | COLOPHON |
|
|
|
OVS-PKI(8) Open vSwitch OVS-PKI(8)
ovs-pki - OpenFlow public key infrastructure management utility
Each command takes the form:
ovs-pki <options> <command> <args>...
The implemented commands and their arguments are:
• ovs-pki init
• ovs-pki req <name>
• ovs-pki sign <name> [<type>]
• ovs-pki req+sign <name> [<type>]
• ovs-pki verify <name> [<type>]
• ovs-pki fingerprint <file>
• ovs-pki self-sign <name>
Each <type> above is a certificate type, either switch (default)
or controller.
The available options are:
• -k <type> or --key=<type>
• -B <nbits> or --bits=<nbits>
• -D <file> or --dsaparam=<file>
• -b or --batch
• -f or --force
• -d <dir> or --dir=<dir>
• -l <file> or --log=<file>
• -u or --unique
• -h or --help
The ovs-pki program sets up and manages a public key
infrastructure for use with OpenFlow. It is intended to be a
simple interface for organizations that do not have an
established public key infrastructure. Other PKI tools can
substitute for or supplement the use of ovs-pki.
ovs-pki uses openssl(1) for certificate management and key
generation.
The following ovs-pki commands support manual PKI administration:
• init
Initializes a new PKI (by default in /var/lib/openvswitch/pki,
although this default may be changed at Open vSwitch build
time) and populates it with a pair of certificate authorities
for controllers and switches.
This command should ideally be run on a high-security machine
separate from any OpenFlow controller or switch, called the CA
machine. The files pki/controllerca/cacert.pem and
pki/switchca/cacert.pem that it produces will need to be copied
over to the OpenFlow switches and controllers, respectively.
Their contents may safely be made public.
By default, ovs-pki generates 2048-bit RSA keys. The -B or
--bits option (see below) may be used to override the key
length. The -k dsa or --key=dsa option may be used to use DSA
in place of RSA. If DSA is selected, the dsaparam.pem file
generated in the new PKI hierarchy must be copied to any
machine on which the req command (see below) will be executed.
Its contents may safely be made public.
Other files generated by init may remain on the CA machine.
The files pki/controllerca/private/cakey.pem and
pki/switchca/private/cakey.pem have particularly sensitive
contents that should not be exposed.
• req <name>
Generates a new private key named <name>-privkey.pem and
corresponding certificate request named <name>-req.pem. The
private key can be intended for use by a switch or a
controller.
This command should ideally be run on the switch or controller
that will use the private key to identify itself. The file
<name>-req.pem must be copied to the CA machine for signing
with the sign command (below).
This command will output a fingerprint to stdout as its final
step. Write down the fingerprint and take it to the CA machine
before continuing with the sign step.
When RSA keys are in use (as is the default), req, unlike the
rest of the ovs-pki commands, does not need access to a PKI
hierarchy created by ovs-pki init. The -B or --bits option
(see below) may be used to specify the number of bits in the
generated RSA key.
When DSA keys are used (as specified with --key=dsa), req needs
access to the dsaparam.pem file created as part of the PKI
hierarchy (but not to other files in that tree). By default,
ovs-pki looks for this file in the PKI directory as
dsaparam.pem, but the -D or --dsaparam option (see below) may
be used to specify an alternate location.
<name>-privkey.pem has sensitive contents that should not be
exposed. <name>-req.pem may be safely made public.
• sign <name> [<type>]
Signs the certificate request named <name>-req.pem that was
produced in the previous step, producing a certificate named
<name>-cert.pem. <type>, either switch (default) or
controller, indicates the use for which the key is being
certified.
This command must be run on the CA machine.
The command will output a fingerprint to stdout and request
that you verify that it is the same fingerprint output by the
req command. This ensures that the request being signed is the
same one produced by req. (The -b or --batch option suppresses
the verification step.)
The file <name>-cert.pem will need to be copied back to the
switch or controller for which it is intended. Its contents
may safely be made public.
• req+sign <name> [<type>]
Combines the req and sign commands into a single step,
outputting all the files produced by each. The
<name>-privkey.pem and <name>-cert.pem files must be copied
securely to the switch or controller. <name>-privkey.pem has
sensitive contents and must not be exposed in transit.
Afterward, it should be deleted from the CA machine.
This combined method is, theoretically, less secure than the
individual steps performed separately on two different
machines, because there is additional potential for exposure of
the private key. However, it is also more convenient.
• verify <name> [<type>]
Verifies that <name>-cert.pem is a valid certificate for the
given <type> of use, either switch (default) or controller. If
the certificate is valid for this use, it prints the message
<name>-cert.pem: OK; otherwise, it prints an error message.
• fingerprint <file>
Prints the fingerprint for <file>. If <file> is a certificate,
then this is the SHA-1 digest of the DER encoded version of the
certificate; otherwise, it is the SHA-1 digest of the entire
file.
• self-sign <name>
Signs the certificate request named <name>-req.pem using the
private key <name>-privkey.pem, producing a self-signed
certificate named <name>-cert.pem. The input files should have
been produced with ovs-pki req.
Some controllers accept such self-signed certificates.
• -k <type> or --key=<type>
For the init command, sets the public key algorithm to use for
the new PKI hierarchy. For the req and req+sign commands, sets
the public key algorithm to use for the key to be generated,
which must match the value specified on init. With other
commands, the value has no effect.
The <type> may be rsa (the default) or dsa.
• -B <nbits> or --bits=<nbits>
Sets the number of bits in the key to be generated. When RSA
keys are in use, this option affects only the init, req, and
req+sign commands, and the same value should be given each
time. With DSA keys are in use, this option affects only the
init command.
The value must be at least 1024. The default is 2048.
• -D <file> or --dsaparam=<file>
Specifies an alternate location for the dsaparam.pem file
required by the req and req+sign commands. This option affects
only these commands, and only when DSA keys are used.
The default is dsaparam.pem under the PKI hierarchy.
• -b or --batch
Suppresses the interactive verification of fingerprints that
the sign command by default requires.
• -d <dir> or --dir=<dir>
Specifies the location of the PKI hierarchy to be used or
created by the command. All commands, except req, need access
to a PKI hierarchy.
The default PKI hierarchy is /var/lib/openvswitch/pki, although
this default may be changed at Open vSwitch build time
• -f or --force
By default, ovs-pki will not overwrite existing files or
directories. This option overrides this behavior.
• -l <file> or --log=<file>
Sets the log file to <file>. The default is ovs-pki.log in the
OVS log directory. The default OVS log directory is
/var/log/openvswitch, although this default may be changed at
Open vSwitch build time.
• -u or --unique
Changes the format of the certificate’s Common Name (CN) field.
By default, this field has the format <name> id:<uuid-or-date>.
This option causes the provided name to be treated as unique
and changes the format of the CN field to be simply <name>.
• -h or --help
Prints a help usage message and exits.
The Open vSwitch Development Community
2016-2024, The Open vSwitch Development Community
This page is part of the Open vSwitch (a distributed virtual
multilayer switch) project. Information about the project can be
found at ⟨http://openvswitch.org/⟩. If you have a bug report for
this manual page, send it to bugs@openvswitch.org. This page was
obtained from the project's upstream Git repository
⟨https://github.com/openvswitch/ovs.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-07.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
3.3.90 Jun 13, 2024 OVS-PKI(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|