|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | DESCRIPTION | FILE LABELING | AUTHOR | FILES | SEE ALSO | COLOPHON |
|
|
|
selinux(8) SELinux Command Line documentation selinux(8)
SELinux - NSA Security-Enhanced Linux (SELinux)
NSA Security-Enhanced Linux (SELinux) is an implementation of a
flexible mandatory access control architecture in the Linux
operating system. The SELinux architecture provides general
support for the enforcement of many kinds of mandatory access
control policies, including those based on the concepts of Type
Enforcement®, Role- Based Access Control, and Multi-Level
Security. Background information and technical documentation
about SELinux can be found at https://github.com/SELinuxProject.
The /etc/selinux/config configuration file controls whether
SELinux is enabled or disabled, and if enabled, whether SELinux
operates in permissive mode or enforcing mode. The SELINUX
variable may be set to any one of disabled, permissive, or
enforcing to select one of these options. The disabled disables
most of the SELinux kernel and application code, leaving the
system running without any SELinux protection. The permissive
option enables the SELinux code, but causes it to operate in a
mode where accesses that would be denied by policy are permitted
but audited. The enforcing option enables the SELinux code and
causes it to enforce access denials as well as auditing them.
permissive mode may yield a different set of denials than
enforcing mode, both because enforcing mode will prevent an
operation from proceeding past the first denial and because some
application code will fall back to a less privileged mode of
operation if denied access.
NOTE: Disabling SELinux by setting SELINUX=disabled in
/etc/selinux/config is deprecated and depending on kernel version
and configuration it might not lead to SELinux being completely
disabled. Specifically, the SELinux hooks will still be executed
internally, but the SELinux policy will not be loaded and no
operation will be denied. In such state, the system will act as
if SELinux was disabled, although some operations might behave
slightly differently. To properly disable SELinux, it is
recommended to use the selinux=0 kernel boot option instead. In
that case SELinux will be disabled regardless of what is set in
the /etc/selinux/config file.
The /etc/selinux/config configuration file also controls what
policy is active on the system. SELinux allows for multiple
policies to be installed on the system, but only one policy may
be active at any given time. At present, multiple kinds of
SELinux policy exist: targeted, mls for example. The targeted
policy is designed as a policy where most user processes operate
without restrictions, and only specific services are placed into
distinct security domains that are confined by the policy. For
example, the user would run in a completely unconfined domain
while the named daemon or apache daemon would run in a specific
domain tailored to its operation. The MLS (Multi-Level Security)
policy is designed as a policy where all processes are
partitioned into fine-grained security domains and confined by
policy. MLS also supports the Bell And LaPadula model, where
processes are not only confined by the type but also the level of
the data.
You can define which policy you will run by setting the
SELINUXTYPE environment variable within /etc/selinux/config. You
must reboot and possibly relabel if you change the policy type to
have it take effect on the system. The corresponding policy
configuration for each such policy must be installed in the
/etc/selinux/{SELINUXTYPE}/ directories.
A given SELinux policy can be customized further based on a set
of compile-time tunable options and a set of runtime policy
booleans. system-config-selinux allows customization of these
booleans and tunables.
Many domains that are protected by SELinux also include SELinux
man pages explaining how to customize their policy.
All files, directories, devices ... have a security context/label
associated with them. These context are stored in the extended
attributes of the file system. Problems with SELinux often arise
from the file system being mislabeled. This can be caused by
booting the machine with a non SELinux kernel. If you see an
error message containing file_t, that is usually a good indicator
that you have a serious problem with file system labeling.
The best way to relabel the file system is to create the flag
file /.autorelabel and reboot. system-config-selinux, also has
this capability. The restorecon/fixfiles commands are also
available for relabeling files.
Please note that using mount flag nosuid also disables SELinux
domain transitions, unless permission nosuid_transition is used
in the policy to allow this, which in turn needs also policy
capability nnp_nosuid_transition.
This manual page was written by Dan Walsh <dwalsh@redhat.com>.
/etc/selinux/config
booleans(8), setsebool(8), sepolicy(8), system-config-selinux(8),
togglesebool(8), restorecon(8), fixfiles(8), setfiles(8),
semanage(8), sepolicy(8)
Every confined service on the system has a man page in the
following format:
<servicename>_selinux(8)
For example, httpd has the httpd_selinux(8) man page.
man -k selinux
Will list all SELinux man pages.
This page is part of the selinux (Security-Enhanced Linux user-
space libraries and tools) project. Information about the
project can be found at
⟨https://github.com/SELinuxProject/selinux/wiki⟩. If you have a
bug report for this manual page, see
⟨https://github.com/SELinuxProject/selinux/wiki/Contributing⟩.
This page was obtained from the project's upstream Git repository
⟨https://github.com/SELinuxProject/selinux⟩ on 2024-06-14. (At
that time, the date of the most recent commit that was found in
the repository was 2023-05-11.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
dwalsh@redhat.com 29 Apr 2005 selinux(8)
Pages that refer to this page: crontab(1), connect(2), avc_add_callback(3), avc_cache_stats(3), avc_compute_create(3), avc_context_to_sid(3), avc_has_perm(3), avc_init(3), avc_netlink_loop(3), avc_open(3), context_new(3), getcon(3), getexeccon(3), getfilecon(3), getfscreatecon(3), getkeycreatecon(3), get_ordered_context_list(3), getseuserbyname(3), getsockcreatecon(3), init_selinuxmnt(3), is_context_customizable(3), is_selinux_enabled(3), matchmediacon(3), matchpathcon(3), matchpathcon_checkmatches(3), security_check_context(3), security_class_to_string(3), security_compute_av(3), security_disable(3), security_getenforce(3), security_load_booleans(3), security_load_policy(3), security_policyvers(3), selabel_digest(3), selabel_get_digests_all_partial_matches(3), selabel_lookup(3), selabel_lookup_best_match(3), selabel_open(3), selabel_partial_match(3), selabel_stats(3), selinux_binary_policy_path(3), selinux_check_securetty_context(3), selinux_colors_path(3), selinux_file_context_cmp(3), selinux_file_context_verify(3), selinux_getenforcemode(3), selinux_getpolicytype(3), selinux_lsetfilecon_default(3), selinux_policy_root(3), selinux_raw_context_to_color(3), selinux_set_callback(3), selinux_set_mapping(3), set_matchpathcon_flags(3), crontab(5), customizable_types(5), default_contexts(5), default_type(5), failsafe_context(5), removable_context(5), secolor.conf(5), securetty_types(5), selabel_db(5), selabel_file(5), selabel_media(5), selabel_x(5), selinux_config(5), sepermit.conf(5), service_seusers(5), sestatus.conf(5), setrans.conf(5), seusers(5), user_contexts(5), virtual_domain_context(5), virtual_image_context(5), keyrings(7), xattr(7), avcstat(8), booleans(8), chcat(8), getenforce(8), getsebool(8), matchpathcon(8), mcs(8), mount(8), pam_selinux(8), pam_sepermit(8), sandbox(8), sefcontext_compile(8), selinuxenabled(8), semanage(8), semanage-boolean(8), semanage-dontaudit(8), semanage-export(8), semanage-fcontext(8), semanage-ibendport(8), semanage-ibpkey(8), semanage-import(8), semanage-interface(8), semanage-login(8), semanage-module(8), semanage-node(8), semanage-permissive(8), semanage-port(8), semanage-user(8), sepolicy(8), sepolicy-booleans(8), sepolicy-communicate(8), sepolicy-generate(8), sepolicy-gui(8), sepolicy-interface(8), sepolicy-manpage(8), sepolicy-network(8), sepolicy-transition(8), sestatus(8), setenforce(8), seunshare(8), togglesebool(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|