|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | DESCRIPTION | WHAT IS BABELTRACE 2? | BABELTRACE 2 CONCEPTS | TRACE PROCESSING GRAPH REPRESENTATION | BUGS | RESOURCES | AUTHORS | COPYRIGHT | SEE ALSO | COLOPHON |
|
|
|
BABELTRACE2-INTRO(7) Babeltrace 2 manual BABELTRACE2-INTRO(7)
babeltrace2-intro - Introduction to Babeltrace 2
This manual page is an introduction to the Babeltrace 2 project.
The “WHAT IS BABELTRACE 2?” section describes the parts of the
project and shows the major changes from Babeltrace 1 to
Babeltrace 2 while the “BABELTRACE 2 CONCEPTS” section defines
the core concepts of Babeltrace 2.
The “TRACE PROCESSING GRAPH REPRESENTATION” section shows how
some concepts are visually represented in other Babeltrace 2
manual pages.
Babeltrace 2 is an open-source software project of which the
purpose is to process or convert traces (see
<https://en.wikipedia.org/wiki/Tracing_(software)>).
The Babeltrace 2 project includes the following parts:
Babeltrace 2 library (libbabeltrace2)
A shared library with a C API.
With libbabeltrace2, you can programmatically create plugins
and component classes, build and run trace processing graphs,
and more (see the “BABELTRACE 2 CONCEPTS” section for more
details about those concepts).
All the other Babeltrace 2 parts rely on this library.
babeltrace2 command-line program
A command-line interface which uses libbabeltrace2 to load
plugins, create a trace processing graph, create components,
connect their ports correctly, and run the graph.
You can also use babeltrace2 to list the available plugins or
to query an object from a component class.
See babeltrace2(1).
Babeltrace 2 Python bindings
A Python 3 package (bt2) which offers a Pythonic interface of
libbabeltrace2.
You can perform the same operations which are available in
libbabeltrace2 with the Python bindings, but more
conveniently and with less code. However, the Python bindings
are less performant than libbabeltrace2.
Babeltrace 2 project’s plugins
The Babeltrace 2 plugins shipped with the project.
Those plugins are not special in that they only rely on
libbabeltrace2 and you don’t need them to use libbabeltrace2,
babeltrace2(1), or the Python bindings. However, the
project’s plugins provide many widely used trace format
encoders/decoders as well as common trace processing graph
utilities.
The Babeltrace 2 project’s plugins are:
ctf
Common Trace Format (see <https://diamon.org/ctf/>) (CTF)
input/output, including the LTTng live source.
See babeltrace2-plugin-ctf(7).
lttng-utils
Graph utilities specific to LTTng (see
<https://lttng.org/>) traces.
See babeltrace2-plugin-lttng-utils(7).
text
Plain text input/output.
See babeltrace2-plugin-text(7).
utils
Common graph utilities (muxer, trimmer, counter, dummy
sink).
See babeltrace2-plugin-utils(7).
Changes since Babeltrace 1
This manual page is an introduction to Babeltrace 2, a rewrite of
Babeltrace 1 with a focus on extensibility, flexibility, and
interoperability.
Babeltrace 1 exists since 2010.
You can install both projects on the same file system as there
are no file name conflicts.
The major improvements brought by Babeltrace 2 are:
General
• Full plugin support: any user can distribute a
Babeltrace 2 plugin and, as long as libbabeltrace2 finds
it, any application linked to libbabeltrace2 can load it
and use it.
Plugins are not just trace format encoders and decoders:
they package source, filter, and sink component classes
so that you can connect specialized, reusable components
together in a trace processing graph to create a
customized trace conversion or analysis device.
This modular strategy is much like how the FFmpeg (see
<https://www.ffmpeg.org/>), GStreamer (see
<https://gstreamer.freedesktop.org/>), and DirectShow
(see <https://en.wikipedia.org/wiki/DirectShow>) projects
approach media stream processing.
• All the parts of the Babeltrace 2 project run on the
major operating systems, including Windows and macOS.
• Some component classes, such as sink.text.pretty (similar
to the text output format of babeltrace(1)) and
sink.text.details, can write color codes to the standard
output when it’s connected to a color-enabled terminal.
The Babeltrace 2 log, printed to the standard output, can
also be colorized.
Command-line interface
• Whereas you can convert traces from one format to another
with Babeltrace 1’s CLI tool, babeltrace(1), you can also
execute a custom trace manipulation task with
babeltrace2(1) thanks to the babeltrace2-run(1) command.
• The babeltrace2-convert(1) command features an automatic
source component discovery algorithm to find the best
suited components to create for a given non-option
argument (file or directory path, or custom string like
an LTTng live (see <https://lttng.org>) URL).
For example:
$ babeltrace2 /path/to/ctf/trace
$ babeltrace2 net://localhost/host/myhost/my-session
CTF (see <https://diamon.org/ctf/>) input/output
• The source.ctf.fs component class, which is more or less
the equivalent of Babeltrace 1’s ctf input format, has
features not found in Babeltrace 1:
• The component handles many trace quirks which are the
results of known tracer bugs and corner cases
(LTTng-UST, LTTng-modules, and barectf (see
<https://github.com/efficios/barectf>)), making it
possible to decode malformed packets.
• The component merges CTF traces sharing the same UUID
into a single, logical trace.
This feature supports LTTng 2.11’s tracing session
rotation trace chunks.
• With a sink.ctf.fs component, you can create CTF traces
on the file system.
With babeltrace2(1), you can use the --output-format=ctf
and --output options to create an implicit sink.ctf.fs
component.
For example:
$ babeltrace2 /path/to/input/trace \
--output-format=ctf --output=trace-dir
LTTng live (see <https://lttng.org>) input
• The babeltrace(1) command exits successfully when it
cannot find an LTTng live (--input-format=lttng-live
option) tracing session.
The session-not-found-action initialization parameter
controls what a source.ctf.lttng-live message iterator
does when it cannot find the remote tracing session.
If the action is end, the message iterator does like
babeltrace(1) and simply ends successfully.
If the action is continue (the default), the message
iterator never ends: it keeps on trying until the tracing
session exists, indeed subscribing to the session.
Library
• libbabeltrace2 shares nothing with libbabeltrace.
The Babeltrace 2 library C API has features such as:
• A single header file.
• Function precondition and postcondition checking.
• Object-oriented model with shared and unique objects.
• Strict C typing and const correctness.
• User-extensible classes.
• Rich, thread-safe error reporting.
• Per-component and per-subsystem logging levels.
• Trace intermediate representation (IR) objects to
make the API trace-format-agnostic.
• A versioned protocol for message interchange between
components to enable forward and backward
compatibility.
• You can build the library in developer mode to enable an
extensive set of function precondition and postcondition
checks.
The developer mode can help detect programming errors
early when you develop a Babeltrace 2 plugin or an
application using libbabeltrace2.
See the project’s README for build-time requirements and
detailed build instructions.
This section defines the main concepts of the Babeltrace 2
project.
These concepts translate into types and functions in
libbabeltrace2 and its Python bindings, but also as command-line
actions and options in the babeltrace2 program. The other
Babeltrace 2 manual pages assume that you are familiar with the
following definitions.
Some Babeltrace 2 concepts are interdependent: it is normal to
jump from one definition to another to understand the big
picture.
Component class
A reusable class which you can instantiate as one or more
components within a trace processing graph.
There are three types of component classes used to create the
three types of components: source, filter, and sink.
A component class implements methods, one of which is an
initialization method, or constructor, to create a component.
You pass initialization parameters to this method to
customize the created component. For example, the
initialization method of the source.ctf.fs component class
accepts a mandatory inputs parameter which is an array of
file system path(s) to the CTF trace(s). It also accepts an
optional clock-class-offset-ns parameter which is an offset,
in nanoseconds, to add to all the clock classes (descriptors
of stream clocks) found in the traces’s metadata.
A component class can have a description and a help text.
Component
A node within a trace processing graph.
There are three types of components:
Source component
An input component which produces messages.
Examples: CTF files input, log file input, LTTng live
input, random event generator.
Filter component
An intermediate component which can transform the
messages it consumes, augment them, sort them, discard
them, or create new ones.
Examples: filter which removes messages based on an
expression, filter which adds debugging information to
selected events, message muxer, trace trimmer.
Sink component
An output component which consumes messages and usually
writes them to one or more formatted files.
Examples: log file output, CTF files output,
pretty-printed plain text output.
Components are connected together within a trace processing
graph through their ports. Source components have output
ports, sink components have input ports, and filter
components have both.
A component is the instance of a component class. The terms
component and component class instance are equivalent.
Within a trace processing graph, each component has a unique
name. This is not the name of its component class, but an
instance name. If human is a component class name, than Nancy
and John could be component names.
Once a graph is configured (the first time it runs), you
cannot add components to it for the remaining graph’s
lifetime.
Port
A connection point, on a component, from which are sent or
where are received messages when the trace processing graph
runs.
An output port is from where messages are sent. An input port
is where messages are received. Source components have output
ports, sink components have input ports, and filter
components have both.
You can only connect an output port to a single input port.
All ports do not need to be connected.
A filter or sink component receiving messages from its input
ports is said to consume messages.
The link between an output port and input port is a
connection.
Once a graph is configured (the first time it runs), you
cannot connect ports for the remaining graph’s lifetime.
Connection
The link between an output port and an input port through
which messages flow when a trace processing graph runs.
Message iterator
An iterator on an input port of which the returned elements
are messages.
A component or another message iterator can create many
message iterators on a single input port, before or while the
trace processing graph runs.
Message
The element of a message iterator.
Messages flow from output ports to input ports.
A source component message iterator produces messages, while
a sink component consumes them. A filter component message
iterator can both consume and produce messages.
The main types of messages are:
Event
A trace event record within a packet or within a stream.
Packet beginning
The beginning of a packet within a stream.
A packet is a conceptual container of events.
Packet end
The end of a packet within a stream.
Stream beginning
The beginning of a stream.
A stream is a conceptual container of packets and/or
events.
Usually, a given source component’s output port sends
packet and event messages which belong to a single
stream, but it’s not required.
Stream end
The end of a stream.
Discarded events
A count of discarded events within a given time interval
for a given stream.
Discarded packets
A count of discarded packets within a given time interval
for a given stream.
Trace processing graph
A filter graph (see
<https://en.wikipedia.org/wiki/Filter_graph>) where nodes are
components and messages flow from output ports to input
ports.
You can build a trace processing graph with libbabeltrace2,
with the Babeltrace 2 Python bindings, or with the
babeltrace2-run(1) and babeltrace2-convert(1) CLI commands.
When a trace processing graph runs, the sink components
consume messages from their input ports, making all the
graph’s message iterators work one message at a time to
perform the trace conversion or analysis duty.
Plugin
A container, or package, of component classes as a shared
library or Python module.
Each component class within a plugin has a type (source,
filter, or sink) and a name. The type and name pair is unique
within a given plugin.
libbabeltrace2 can load a plugin (.so, .dll, or .py file) at
run time: the result is a plugin object in which you can find
a specific component class and instantiate it within a trace
processing graph as a component.
The babeltrace2 program uses the
COMP-CLS-TYPE.PLUGIN-NAME.COMP-CLS-NAME format to identify a
specific component class within a specific plugin.
COMP-CLS-TYPE is either source (or src), filter (or flt), or
sink.
You can list the available Babeltrace 2 plugins with the
babeltrace2-list-plugins(1) command.
Query
An operation with which you can get a named object from a
component class, possibly with custom query parameters.
The plain text metadata stream of a CTF trace and the
available LTTng live sessions of a given LTTng relay daemon
are examples of query objects.
You can use libbabeltrace2, the Babeltrace 2 Python bindings,
or the babeltrace2-query(1) CLI command to query a component
class’s object.
In the Babeltrace 2 manual pages, a component is represented with
a box. The box has the component class type, plugin name, and
component class name at the top. Just below, between square
brackets, is its component name within the trace processing
graph. Each port is represented with an @ symbol on the border(s)
of the component box with its name inside the box. Output ports
are on the box’s right border while input ports are on the box’s
left border.
For example, here’s a source component box:
+------------+
| src.ctf.fs |
| [my-src] |
| |
| stream0 @
| stream1 @
| stream2 @
+------------+
This one is an instance of the source.ctf.fs component class
named my-src. It has three output ports named stream0, stream1,
and stream2.
A trace processing graph is represented with multiple component
boxes connected together. The connections are arrows from output
ports to input ports.
For example, here’s a simple conversion graph:
+------------+ +-----------------+ +------------------+
| src.ctf.fs | | flt.utils.muxer | | sink.text.pretty |
| [ctf] | | [muxer] | | [text] |
| | | | | |
| stream0 @--->@ in0 out @--->@ in |
| stream1 @--->@ in1 | +------------------+
| stream2 @--->@ in2 |
+------------+ @ in3 |
+-----------------+
Note that input port in3 of component muxer is not connected in
this example.
Sometimes, we symbolically represent other resources which are
consumed from or produced by components. In this case, arrows are
used, but they do not go to or from port symbols (@), except for
messages. For example, in the graph above, the ctf source
component consumes a CTF trace and the text sink component prints
plain text to the terminal, so here’s a more complete diagram:
CTF trace
|
| +------------+ +-----------------+ +------------------+
| | src.ctf.fs | | flt.utils.muxer | | sink.text.pretty |
'-->| [ctf] | | [muxer] | | [text] |
| | | | | |
| stream0 @--->@ in0 out @--->@ in |
| stream1 @--->@ in1 | +-----+------------+
| stream2 @--->@ in2 | |
+------------+ @ in3 | '--> Terminal
+-----------------+
Here’s another example of a more complex graph which splits a
specific stream using some criteria:
+------------+ +-----------------+ +------------------+
| src.ctf.fs | | flt.utils.muxer | | sink.text.pretty |
| [ctf-in] | | [muxer] | | [text] |
| | | | | |
| stream0 @--->@ in0 out @--->@ in |
| stream1 @--->@ in1 | +------------------+
| stream2 @-. @ in2 |
+------------+ | +-----------------+ +-------------+
| | sink.ctf.fs |
| | [ctf-out0] |
| +-------------------+ | |
| | flt.some.splitter | .->@ in |
| | [splitter] | | +-------------+
| | | |
'->@ in A @-' +-------------+
| B @-. | sink.ctf.fs |
+-------------------+ | | [ctf-out1] |
| | |
'->@ in |
+-------------+
If you encounter any issue or usability problem, please report it
on the Babeltrace bug tracker (see
<https://bugs.lttng.org/projects/babeltrace>).
The Babeltrace project shares some communication channels with
the LTTng project (see <https://lttng.org/>).
• Babeltrace website (see <https://babeltrace.org/>)
• Mailing list (see <https://lists.lttng.org>) for support and
development: lttng-dev@lists.lttng.org
• IRC channel (see <irc://irc.oftc.net/lttng>): #lttng on
irc.oftc.net
• Bug tracker (see
<https://bugs.lttng.org/projects/babeltrace>)
• Git repository (see
<https://git.efficios.com/?p=babeltrace.git>)
• GitHub project (see <https://github.com/efficios/babeltrace>)
• Continuous integration (see
<https://ci.lttng.org/view/Babeltrace/>)
• Code review (see
<https://review.lttng.org/q/project:babeltrace>)
The Babeltrace 2 project is the result of hard work by many
regular developers and occasional contributors.
The current project maintainer is Jérémie Galarneau
<mailto:jeremie.galarneau@efficios.com>.
This manual page is part of the Babeltrace 2 project.
Babeltrace is distributed under the MIT license (see
<https://opensource.org/licenses/MIT>).
babeltrace2(1)
This page is part of the babeltrace (trace read and write
libraries and a trace converter) project. Information about the
project can be found at ⟨http://www.efficios.com/babeltrace⟩. If
you have a bug report for this manual page, send it to
lttng-dev@lists.lttng.org. This page was obtained from the
project's upstream Git repository
⟨git://git.efficios.com/babeltrace.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-05-31.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Babeltrace 2.1.0-rc1 14 September 2019 BABELTRACE2-INTRO(7)
Pages that refer to this page: babeltrace2(1), babeltrace2-convert(1), babeltrace2-help(1), babeltrace2-list-plugins(1), babeltrace2-query(1), babeltrace2-run(1), babeltrace2-filter.lttng-utils.debug-info(7), babeltrace2-filter.utils.muxer(7), babeltrace2-filter.utils.trimmer(7), babeltrace2-plugin-ctf(7), babeltrace2-plugin-lttng-utils(7), babeltrace2-plugin-text(7), babeltrace2-plugin-utils(7), babeltrace2-query-babeltrace.support-info(7), babeltrace2-query-babeltrace.trace-infos(7), babeltrace2-sink.ctf.fs(7), babeltrace2-sink.text.details(7), babeltrace2-sink.text.pretty(7), babeltrace2-sink.utils.counter(7), babeltrace2-sink.utils.dummy(7), babeltrace2-source.ctf.fs(7), babeltrace2-source.ctf.lttng-live(7), babeltrace2-source.text.dmesg(7)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|