|
HTML rendering created 2023-12-22 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | INTRODUCTION | THE MANAGER OBJECT | THE IMAGE OBJECT | VERSIONING | HISTORY | NOTES | COLOPHON |
|
|
|
ORG.FRE...PORTABLE1(5) org.freedesktop.portable1 ORG.FRE...PORTABLE1(5)
org.freedesktop.portable1 - The D-Bus interface of
systemd-portabled
systemd-portabled.service(8) is a system service that may be used
to attach, detach and inspect portable services. This page
describes the D-Bus interface.
The service exposes the following interfaces on the Manager
object on the bus:
node /org/freedesktop/portable1 {
interface org.freedesktop.portable1.Manager {
methods:
GetImage(in s image,
out o object);
ListImages(out a(ssbtttso) images);
GetImageOSRelease(in s image,
out a{ss} os_release);
GetImageMetadata(in s image,
in as matches,
out s image,
out ay os_release,
out a{say} units);
GetImageMetadataWithExtensions(in s image,
in as extensions,
in as matches,
in t flags,
out s image,
out ay os_release,
out a{say} extensions,
out a{say} units);
GetImageState(in s image,
out s state);
GetImageStateWithExtensions(in s image,
in as extensions,
in t flags,
out s state);
AttachImage(in s image,
in as matches,
in s profile,
in b runtime,
in s copy_mode,
out a(sss) changes);
AttachImageWithExtensions(in s image,
in as extensions,
in as matches,
in s profile,
in s copy_mode,
in t flags,
out a(sss) changes);
DetachImage(in s image,
in b runtime,
out a(sss) changes);
DetachImageWithExtensions(in s image,
in as extensions,
in t flags,
out a(sss) changes);
ReattachImage(in s image,
in as matches,
in s profile,
in b runtime,
in s copy_mode,
out a(sss) changes_removed,
out a(sss) changes_updated);
ReattachImageWithExtensions(in s image,
in as extensions,
in as matches,
in s profile,
in s copy_mode,
in t flags,
out a(sss) changes_removed,
out a(sss) changes_updated);
RemoveImage(in s image);
MarkImageReadOnly(in s image,
in b read_only);
SetImageLimit(in s image,
in t limit);
SetPoolLimit(in t limit);
properties:
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly s PoolPath = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly t PoolUsage = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly t PoolLimit = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly as Profiles = ['...', ...];
};
interface org.freedesktop.DBus.Peer { ... };
interface org.freedesktop.DBus.Introspectable { ... };
interface org.freedesktop.DBus.Properties { ... };
};
Methods
GetImage() may be used to get the image object path of the image
with the specified name.
ListImages() returns an array of all currently known images. The
structures in the array consist of the following fields: image
name, type, read-only flag, creation time, modification time,
current disk space, usage and image object path.
GetImageOSRelease() retrieves the OS release information of an
image. This method returns an array of key value pairs read from
the os-release(5) file in the image and is useful to identify the
operating system used in a portable service.
GetImageMetadata() retrieves metadata associated with an image.
This method returns the image name, the image's os-release(5)
content in the form of a (streamable) array of bytes, and a list
of portable units contained in the image, in the form of a string
(unit name) and an array of bytes with the content.
GetImageMetadataWithExtensions() retrieves metadata associated
with an image. This method is a superset of GetImageMetadata()
with the addition of a list of extensions as input parameter,
which were overlaid on top of the main image via
AttachImageWithExtensions(). The path of each extension and an
array of bytes with the content of the respective
extension-release file are returned, one such structure for each
extension named in the input arguments.
GetImageState() retrieves the image state as one of the following
strings:
• detached
• attached
• attached-runtime
• enabled
• enabled-runtime
• running
• running-runtime
GetImageStateWithExtensions() is a superset of GetImageState(),
with additional support for a list of extensions as input
parameters, which is necessary to query the state in case the
image was attached in that particular way. The flag parameter is
currently unused and reserved for future purposes.
AttachImage() attaches a portable image to the system. This
method takes an image path or name, a list of strings that will
be used to search for unit files inside the image (partial or
complete matches), a string indicating which portable profile to
use for the image (see Profiles property for a list of available
profiles), a boolean indicating whether to attach the image only
for the current boot session, and a string representing the
preferred copy mode (whether to copy the image or to just symlink
it) with the following possible values:
• (null)
• copy
• symlink
This method returns the list of changes applied to the system
(for example, which unit was added and is now available as a
system service). Each change is represented as a triplet of
strings: the type of change applied, the path on which it was
applied, and the source (if any). The type of change applied will
be one of the following possible values:
• copy
• symlink
• write
• mkdir
Note that an image cannot be attached if a unit that it contains
is already present on the system.
AttachImageWithExtensions() attaches a portable image to the
system. This method is a superset of AttachImage() with the
addition of a list of extensions as input parameter, which will
be overlaid on top of the main image. When this method is used,
detaching must be done by passing the same arguments via the
DetachImageWithExtensions() method. For more details on this
functionality, see the MountImages= entry on systemd.exec(5) and
systemd-sysext(8).
DetachImage() detaches a portable image from the system. This
method takes an image path or name, and a boolean indicating
whether the image to detach was attached only for the current
boot session or persistently. This method returns the list of
changes applied to the system (for example, which unit was
removed and is no longer available as a system service). Each
change is represented as a triplet of strings: the type of change
applied, the path on which it was applied, and the source (if
any). The type of change applied will be one of the following
possible values:
• unlink
Note that an image cannot be detached if a unit that it contains
is running.
DetachImageWithExtensions() detaches a portable image from the
system. This method is a superset of DetachImage() with the
addition of a list of extensions as input parameter, which were
overlaid on top of the main image via
AttachImageWithExtensions(). The flag parameter is currently
unused and reserved for future purposes.
ReattachImage() combines the effects of the AttachImage() method
and the DetachImage() method. The difference is that it is
allowed to reattach an image while one or more of its units are
running. The reattach operation will fail if no matching image is
attached. The input parameters match the AttachImage() method,
and the return parameters are the combination of the return
parameters of the DetachImage() method (first array, units that
were removed) and the AttachImage() method (second array, units
that were updated or added).
ReattachImageWithExtensions() reattaches a portable image to the
system. This method is a superset of ReattachImage() with the
addition of a list of extensions as input parameter, which will
be overlaid on top of the main image. For more details on this
functionality, see the MountImages= entry on systemd.exec(5) and
systemd-sysext(8). The flag parameter is currently unused and
reserved for future purposes
RemoveImage() removes the image with the specified name.
MarkImageReadOnly() toggles the read-only flag of an image.
SetPoolLimit() sets an overall quota limit on the pool of images.
SetImageLimit() sets a per-image quota limit.
The AttachImageWithExtensions(), DetachImageWithExtensions() and
ReattachImageWithExtensions() methods take in options as flags
instead of booleans to allow for extendability.
SD_SYSTEMD_PORTABLE_FORCE_ATTACH will cause safety checks that
ensure the units are not running while the new image is attached
or detached to be skipped. SD_SYSTEMD_PORTABLE_FORCE_EXTENSION
will cause the check that the extension-release.NAME file in the
extension image matches the image name to be skipped. They are
defined as follows:
#define SD_SYSTEMD_PORTABLE_RUNTIME (UINT64_C(1) << 0)
#define SD_SYSTEMD_PORTABLE_FORCE_ATTACH (UINT64_C(1) << 1)
#define SD_SYSTEMD_PORTABLE_FORCE_EXTENSION (UINT64_C(1) << 2)
Properties
PoolPath specifies the file system path where images are written
to.
PoolUsage specifies the current usage size of the image pool in
bytes.
PoolLimit specifies the size limit of the image pool in bytes.
Profiles specifies the available runtime profiles for portable
services.
The service exposes the following interfaces on the Image object
on the bus:
node /org/freedesktop/portable1 {
interface org.freedesktop.portable1.Image {
methods:
GetOSRelease(out a{ss} os_release);
GetMetadata(in as matches,
out s image,
out ay os_release,
out a{say} units);
GetMetadataWithExtensions(in as extensions,
in as matches,
in t flags,
out s image,
out ay os_release,
out a{say} extensions,
out a{say} units);
GetState(out s state);
GetStateWithExtensions(in as extensions,
in t flags,
out s state);
Attach(in as matches,
in s profile,
in b runtime,
in s copy_mode,
out a(sss) changes);
AttachWithExtensions(in as extensions,
in as matches,
in s profile,
in s copy_mode,
in t flags,
out a(sss) changes);
Detach(in b runtime,
out a(sss) changes);
DetachWithExtensions(in as extensions,
in t flags,
out a(sss) changes);
Reattach(in as matches,
in s profile,
in b runtime,
in s copy_mode,
out a(sss) changes_removed,
out a(sss) changes_updated);
ReattachWithExtensions(in as extensions,
in as matches,
in s profile,
in s copy_mode,
in t flags,
out a(sss) changes_removed,
out a(sss) changes_updated);
Remove();
MarkReadOnly(in b read_only);
SetLimit(in t limit);
properties:
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly s Name = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly s Path = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly s Type = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly b ReadOnly = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly t CreationTimestamp = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly t ModificationTimestamp = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly t Usage = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly t Limit = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly t UsageExclusive = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly t LimitExclusive = ...;
};
interface org.freedesktop.DBus.Peer { ... };
interface org.freedesktop.DBus.Introspectable { ... };
interface org.freedesktop.DBus.Properties { ... };
};
Methods
The following methods implement the same operation as the
respective methods on the Manager object (see above). However,
these methods operate on the image object and hence does not take
an image name parameter. Invoking the methods directly on the
Manager object has the advantage of not requiring a GetImage()
call to get the image object for a specific image name. Calling
the methods on the Manager object is hence a round trip
optimization. List of methods:
• GetOSRelease()
• GetMetadata()
• GetMetadataWithExtensions()
• GetState()
• Attach()
• AttachWithExtensions()
• Detach()
• DetachWithExtensions()
• Reattach()
• ReattachWithExtensions()
• Remove()
• MarkReadOnly()
• SetLimit()
Properties
Name specifies the image name.
Path specifies the file system path where image is stored.
Type specifies the image type.
ReadOnly specifies whether the image is read-only.
CreationTimestamp specifies the image creation timestamp.
ModificationTimestamp specifies the image modification timestamp.
Usage specifies the image disk usage.
Limit specifies the image disk usage limit.
UsageExclusive specifies the image disk usage (exclusive).
LimitExclusive specifies the image disk usage limit (exclusive).
These D-Bus interfaces follow the usual interface versioning
guidelines[1].
The Manager Object
GetImageStateWithExtensions() was added in version 251.
The Image Object
GetStateWithExtensions() was added in version 251.
ReattachWithExtensions() was added in version 254.
1. the usual interface versioning guidelines
https://0pointer.de/blog/projects/versioning-dbus.html
This page is part of the systemd (systemd system and service
manager) project. Information about the project can be found at
⟨http://www.freedesktop.org/wiki/Software/systemd⟩. If you have
a bug report for this manual page, see
⟨http://www.freedesktop.org/wiki/Software/systemd/#bugreports⟩.
This page was obtained from the project's upstream Git repository
⟨https://github.com/systemd/systemd.git⟩ on 2023-12-22. (At that
time, the date of the most recent commit that was found in the
repository was 2023-12-22.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
systemd 255 ORG.FRE...PORTABLE1(5)
Pages that refer to this page: portablectl(1), systemd.directives(7), systemd.index(7), systemd-portabled.service(8)
|
HTML rendering created 2023-12-22 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|