|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SAVING AND RE-USING PRECOMPILED PCRE2 PATTERNS | SECURITY CONCERNS | SAVING COMPILED PATTERNS | RE-USING PRECOMPILED PATTERNS | AUTHOR | REVISION | COLOPHON |
|
|
|
PCRE2SERIALIZE(3) Library Functions Manual PCRE2SERIALIZE(3)
PCRE2 - Perl-compatible regular expressions (revised API)
int32_t pcre2_serialize_decode(pcre2_code **codes,
int32_t number_of_codes, const uint8_t *bytes,
pcre2_general_context *gcontext);
int32_t pcre2_serialize_encode(const pcre2_code **codes,
int32_t number_of_codes, uint8_t **serialized_bytes,
PCRE2_SIZE *serialized_size, pcre2_general_context *gcontext);
void pcre2_serialize_free(uint8_t *bytes);
int32_t pcre2_serialize_get_number_of_codes(const uint8_t *bytes);
If you are running an application that uses a large number of
regular expression patterns, it may be useful to store them in a
precompiled form instead of having to compile them every time the
application is run. However, if you are using the just-in-time
optimization feature, it is not possible to save and reload the
JIT data, because it is position-dependent. The host on which the
patterns are reloaded must be running the same version of PCRE2,
with the same code unit width, and must also have the same
endianness, pointer width and PCRE2_SIZE type. For example,
patterns compiled on a 32-bit system using PCRE2's 16-bit library
cannot be reloaded on a 64-bit system, nor can they be reloaded
using the 8-bit library.
Note that "serialization" in PCRE2 does not convert compiled
patterns to an abstract format like Java or .NET serialization.
The serialized output is really just a bytecode dump, which is
why it can only be reloaded in the same environment as the one
that created it. Hence the restrictions mentioned above.
Applications that are not statically linked with a fixed version
of PCRE2 must be prepared to recompile patterns from their
sources, in order to be immune to PCRE2 upgrades.
The facility for saving and restoring compiled patterns is
intended for use within individual applications. As such, the
data supplied to pcre2_serialize_decode() is expected to be
trusted data, not data from arbitrary external sources. There is
only some simple consistency checking, not complete validation of
what is being re-loaded. Corrupted data may cause undefined
results. For example, if the length field of a pattern in the
serialized data is corrupted, the deserializing code may read
beyond the end of the byte stream that is passed to it.
Before compiled patterns can be saved they must be serialized,
which in PCRE2 means converting the pattern to a stream of bytes.
A single byte stream may contain any number of compiled patterns,
but they must all use the same character tables. A single copy of
the tables is included in the byte stream (its size is 1088
bytes). For more details of character tables, see the section on
locale support in the pcre2api documentation.
The function pcre2_serialize_encode() creates a serialized byte
stream from a list of compiled patterns. Its first two arguments
specify the list, being a pointer to a vector of pointers to
compiled patterns, and the length of the vector. The third and
fourth arguments point to variables which are set to point to the
created byte stream and its length, respectively. The final
argument is a pointer to a general context, which can be used to
specify custom memory management functions. If this argument is
NULL, malloc() is used to obtain memory for the byte stream. The
yield of the function is the number of serialized patterns, or
one of the following negative error codes:
PCRE2_ERROR_BADDATA the number of patterns is zero or less
PCRE2_ERROR_BADMAGIC mismatch of id bytes in one of the
patterns
PCRE2_ERROR_NOMEMORY memory allocation failed
PCRE2_ERROR_MIXEDTABLES the patterns do not all use the same
tables
PCRE2_ERROR_NULL the 1st, 3rd, or 4th argument is NULL
PCRE2_ERROR_BADMAGIC means either that a pattern's code has been
corrupted, or that a slot in the vector does not point to a
compiled pattern.
Once a set of patterns has been serialized you can save the data
in any appropriate manner. Here is sample code that compiles two
patterns and writes them to a file. It assumes that the variable
fd refers to a file that is open for output. The error checking
that should be present in a real application has been omitted for
simplicity.
int errorcode;
uint8_t *bytes;
PCRE2_SIZE erroroffset;
PCRE2_SIZE bytescount;
pcre2_code *list_of_codes[2];
list_of_codes[0] = pcre2_compile("first pattern",
PCRE2_ZERO_TERMINATED, 0, &errorcode, &erroroffset, NULL);
list_of_codes[1] = pcre2_compile("second pattern",
PCRE2_ZERO_TERMINATED, 0, &errorcode, &erroroffset, NULL);
errorcode = pcre2_serialize_encode(list_of_codes, 2, &bytes,
&bytescount, NULL);
errorcode = fwrite(bytes, 1, bytescount, fd);
Note that the serialized data is binary data that may contain any
of the 256 possible byte values. On systems that make a
distinction between binary and non-binary data, be sure that the
file is opened for binary output.
Serializing a set of patterns leaves the original data untouched,
so they can still be used for matching. Their memory must
eventually be freed in the usual way by calling
pcre2_code_free(). When you have finished with the byte stream,
it too must be freed by calling pcre2_serialize_free(). If this
function is called with a NULL argument, it returns immediately
without doing anything.
In order to re-use a set of saved patterns you must first make
the serialized byte stream available in main memory (for example,
by reading from a file). The management of this memory block is
up to the application. You can use the
pcre2_serialize_get_number_of_codes() function to find out how
many compiled patterns are in the serialized data without
actually decoding the patterns:
uint8_t *bytes = <serialized data>;
int32_t number_of_codes =
pcre2_serialize_get_number_of_codes(bytes);
The pcre2_serialize_decode() function reads a byte stream and
recreates the compiled patterns in new memory blocks, setting
pointers to them in a vector. The first two arguments are a
pointer to a suitable vector and its length, and the third
argument points to a byte stream. The final argument is a pointer
to a general context, which can be used to specify custom memory
management functions for the decoded patterns. If this argument
is NULL, malloc() and free() are used. After deserialization, the
byte stream is no longer needed and can be discarded.
pcre2_code *list_of_codes[2];
uint8_t *bytes = <serialized data>;
int32_t number_of_codes =
pcre2_serialize_decode(list_of_codes, 2, bytes, NULL);
If the vector is not large enough for all the patterns in the
byte stream, it is filled with those that fit, and the remainder
are ignored. The yield of the function is the number of decoded
patterns, or one of the following negative error codes:
PCRE2_ERROR_BADDATA second argument is zero or less
PCRE2_ERROR_BADMAGIC mismatch of id bytes in the data
PCRE2_ERROR_BADMODE mismatch of code unit size or PCRE2
version
PCRE2_ERROR_BADSERIALIZEDDATA other sanity check failure
PCRE2_ERROR_MEMORY memory allocation failed
PCRE2_ERROR_NULL first or third argument is NULL
PCRE2_ERROR_BADMAGIC may mean that the data is corrupt, or that
it was compiled on a system with different endianness.
Decoded patterns can be used for matching in the usual way, and
must be freed by calling pcre2_code_free(). However, be aware
that there is a potential race issue if you are using multiple
patterns that were decoded from a single byte stream in a
multithreaded application. A single copy of the character tables
is used by all the decoded patterns and a reference count is used
to arrange for its memory to be automatically freed when the last
pattern is freed, but there is no locking on this reference
count. Therefore, if you want to call pcre2_code_free() for these
patterns in different threads, you must arrange your own locking,
and ensure that pcre2_code_free() cannot be called by two threads
at the same time.
If a pattern was processed by pcre2_jit_compile() before being
serialized, the JIT data is discarded and so is no longer
available after a save/restore cycle. You can, however, process a
restored pattern with pcre2_jit_compile() if you wish.
Philip Hazel
Retired from University Computing Service
Cambridge, England.
Last updated: 27 June 2018
Copyright (c) 1997-2018 University of Cambridge.
This page is part of the PCRE (Perl Compatible Regular
Expressions) project. Information about the project can be found
at ⟨http://www.pcre.org/⟩. If you have a bug report for this
manual page, see
⟨http://bugs.exim.org/enter_bug.cgi?product=PCRE⟩. This page was
obtained from the tarball fetched from
⟨https://github.com/PhilipHazel/pcre2.git⟩ on 2024-06-14. If you
discover any rendering problems in this HTML version of the page,
or you believe there is a better or more up-to-date source for
the page, or you have corrections or improvements to the
information in this COLOPHON (which is not part of the original
manual page), send a mail to man-pages@man7.org
PCRE2 10.32 27 June 2018 PCRE2SERIALIZE(3)
Pages that refer to this page: pcre2test(1)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|