|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
PROLOG | NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | EXAMPLES | APPLICATION USAGE | RATIONALE | FUTURE DIRECTIONS | SEE ALSO | COPYRIGHT |
|
|
|
IOCTL(3P) POSIX Programmer's Manual IOCTL(3P)
This manual page is part of the POSIX Programmer's Manual. The
Linux implementation of this interface may differ (consult the
corresponding Linux manual page for details of Linux behavior),
or the interface may not be implemented on Linux.
ioctl — control a STREAMS device (STREAMS)
#include <stropts.h>
int ioctl(int fildes, int request, ... /* arg */);
The ioctl() function shall perform a variety of control functions
on STREAMS devices. For non-STREAMS devices, the functions
performed by this call are unspecified. The request argument and
an optional third argument (with varying type) shall be passed to
and interpreted by the appropriate part of the STREAM associated
with fildes.
The fildes argument is an open file descriptor that refers to a
device.
The request argument selects the control function to be performed
and shall depend on the STREAMS device being addressed.
The arg argument represents additional information that is needed
by this specific STREAMS device to perform the requested
function. The type of arg depends upon the particular control
request, but it shall be either an integer or a pointer to a
device-specific data structure.
The ioctl() commands applicable to STREAMS, their arguments, and
error conditions that apply to each individual command are
described below.
The following ioctl() commands, with error values indicated, are
applicable to all STREAMS files:
I_PUSH Pushes the module whose name is pointed to by arg
onto the top of the current STREAM, just below the
STREAM head. It then calls the open() function of the
newly-pushed module.
The ioctl() function with the I_PUSH command shall
fail if:
EINVAL Invalid module name.
ENXIO Open function of new module failed.
ENXIO Hangup received on fildes.
I_POP Removes the module just below the STREAM head of the
STREAM pointed to by fildes. The arg argument should
be 0 in an I_POP request.
The ioctl() function with the I_POP command shall
fail if:
EINVAL No module present in the STREAM.
ENXIO Hangup received on fildes.
I_LOOK Retrieves the name of the module just below the
STREAM head of the STREAM pointed to by fildes, and
places it in a character string pointed to by arg.
The buffer pointed to by arg should be at least
FMNAMESZ+1 bytes long, where FMNAMESZ is defined in
<stropts.h>.
The ioctl() function with the I_LOOK command shall
fail if:
EINVAL No module present in the STREAM.
I_FLUSH Flushes read and/or write queues, depending on the
value of arg. Valid arg values are:
FLUSHR Flush all read queues.
FLUSHW Flush all write queues.
FLUSHRW Flush all read and all write queues.
The ioctl() function with the I_FLUSH command shall
fail if:
EINVAL Invalid arg value.
EAGAIN or ENOSR
Unable to allocate buffers for flush message.
ENXIO Hangup received on fildes.
I_FLUSHBAND Flushes a particular band of messages. The arg
argument points to a bandinfo structure. The bi_flag
member may be one of FLUSHR, FLUSHW, or FLUSHRW as
described above. The bi_pri member determines the
priority band to be flushed.
I_SETSIG Requests that the STREAMS implementation send the
SIGPOLL signal to the calling process when a
particular event has occurred on the STREAM
associated with fildes. I_SETSIG supports an
asynchronous processing capability in STREAMS. The
value of arg is a bitmask that specifies the events
for which the process should be signaled. It is the
bitwise-inclusive OR of any combination of the
following constants:
S_RDNORM A normal (priority band set to 0) message
has arrived at the head of a STREAM head
read queue. A signal shall be generated
even if the message is of zero length.
S_RDBAND A message with a non-zero priority band
has arrived at the head of a STREAM head
read queue. A signal shall be generated
even if the message is of zero length.
S_INPUT A message, other than a high-priority
message, has arrived at the head of a
STREAM head read queue. A signal shall be
generated even if the message is of zero
length.
S_HIPRI A high-priority message is present on a
STREAM head read queue. A signal shall be
generated even if the message is of zero
length.
S_OUTPUT The write queue for normal data (priority
band 0) just below the STREAM head is no
longer full. This notifies the process
that there is room on the queue for
sending (or writing) normal data
downstream.
S_WRNORM Equivalent to S_OUTPUT.
S_WRBAND The write queue for a non-zero priority
band just below the STREAM head is no
longer full. This notifies the process
that there is room on the queue for
sending (or writing) priority data
downstream.
S_MSG A STREAMS signal message that contains
the SIGPOLL signal has reached the front
of the STREAM head read queue.
S_ERROR Notification of an error condition has
reached the STREAM head.
S_HANGUP Notification of a hangup has reached the
STREAM head.
S_BANDURG When used in conjunction with S_RDBAND,
SIGURG is generated instead of SIGPOLL
when a priority message reaches the front
of the STREAM head read queue.
If arg is 0, the calling process shall be
unregistered and shall not receive further SIGPOLL
signals for the stream associated with fildes.
Processes that wish to receive SIGPOLL signals shall
ensure that they explicitly register to receive them
using I_SETSIG. If several processes register to
receive this signal for the same event on the same
STREAM, each process shall be signaled when the event
occurs.
The ioctl() function with the I_SETSIG command shall
fail if:
EINVAL The value of arg is invalid.
EINVAL The value of arg is 0 and the calling process
is not registered to receive the SIGPOLL
signal.
EAGAIN There were insufficient resources to store the
signal request.
I_GETSIG Returns the events for which the calling process is
currently registered to be sent a SIGPOLL signal. The
events are returned as a bitmask in an int pointed to
by arg, where the events are those specified in the
description of I_SETSIG above.
The ioctl() function with the I_GETSIG command shall
fail if:
EINVAL Process is not registered to receive the
SIGPOLL signal.
I_FIND Compares the names of all modules currently present
in the STREAM to the name pointed to by arg, and
returns 1 if the named module is present in the
STREAM, or returns 0 if the named module is not
present.
The ioctl() function with the I_FIND command shall
fail if:
EINVAL arg does not contain a valid module name.
I_PEEK Retrieves the information in the first message on the
STREAM head read queue without taking the message off
the queue. It is analogous to getmsg() except that
this command does not remove the message from the
queue. The arg argument points to a strpeek
structure.
The application shall ensure that the maxlen member
in the ctlbuf and databuf strbuf structures is set to
the number of bytes of control information and/or
data information, respectively, to retrieve. The
flags member may be marked RS_HIPRI or 0, as
described by getmsg(). If the process sets flags to
RS_HIPRI, for example, I_PEEK shall only look for a
high-priority message on the STREAM head read queue.
I_PEEK returns 1 if a message was retrieved, and
returns 0 if no message was found on the STREAM head
read queue, or if the RS_HIPRI flag was set in flags
and a high-priority message was not present on the
STREAM head read queue. It does not wait for a
message to arrive. On return, ctlbuf specifies
information in the control buffer, databuf specifies
information in the data buffer, and flags contains
the value RS_HIPRI or 0.
I_SRDOPT Sets the read mode using the value of the argument
arg. Read modes are described in read(). Valid arg
flags are:
RNORM Byte-stream mode, the default.
RMSGD Message-discard mode.
RMSGN Message-nondiscard mode.
The bitwise-inclusive OR of RMSGD and RMSGN shall
return [EINVAL]. The bitwise-inclusive OR of RNORM
and either RMSGD or RMSGN shall result in the other
flag overriding RNORM which is the default.
In addition, treatment of control messages by the
STREAM head may be changed by setting any of the
following flags in arg:
RPROTNORM Fail read() with [EBADMSG] if a message
containing a control part is at the front
of the STREAM head read queue.
RPROTDAT Deliver the control part of a message as
data when a process issues a read().
RPROTDIS Discard the control part of a message,
delivering any data portion, when a
process issues a read().
The ioctl() function with the I_SRDOPT command shall
fail if:
EINVAL The arg argument is not valid.
I_GRDOPT Returns the current read mode setting, as described
above, in an int pointed to by the argument arg.
Read modes are described in read().
I_NREAD Counts the number of data bytes in the data part of
the first message on the STREAM head read queue and
places this value in the int pointed to by arg. The
return value for the command shall be the number of
messages on the STREAM head read queue. For example,
if 0 is returned in arg, but the ioctl() return value
is greater than 0, this indicates that a zero-length
message is next on the queue.
I_FDINSERT Creates a message from specified buffer(s), adds
information about another STREAM, and sends the
message downstream. The message contains a control
part and an optional data part. The data and control
parts to be sent are distinguished by placement in
separate buffers, as described below. The arg
argument points to a strfdinsert structure.
The application shall ensure that the len member in
the ctlbuf strbuf structure is set to the size of a
t_uscalar_t plus the number of bytes of control
information to be sent with the message. The fildes
member specifies the file descriptor of the other
STREAM, and the offset member, which must be suitably
aligned for use as a t_uscalar_t, specifies the
offset from the start of the control buffer where
I_FDINSERT shall store a t_uscalar_t whose
interpretation is specific to the STREAM end. The
application shall ensure that the len member in the
databuf strbuf structure is set to the number of
bytes of data information to be sent with the
message, or to 0 if no data part is to be sent.
The flags member specifies the type of message to be
created. A normal message is created if flags is set
to 0, and a high-priority message is created if flags
is set to RS_HIPRI. For non-priority messages,
I_FDINSERT shall block if the STREAM write queue is
full due to internal flow control conditions. For
priority messages, I_FDINSERT does not block on this
condition. For non-priority messages, I_FDINSERT does
not block when the write queue is full and O_NONBLOCK
is set. Instead, it fails and sets errno to [EAGAIN].
I_FDINSERT also blocks, unless prevented by lack of
internal resources, waiting for the availability of
message blocks in the STREAM, regardless of priority
or whether O_NONBLOCK has been specified. No partial
message is sent.
The ioctl() function with the I_FDINSERT command
shall fail if:
EAGAIN A non-priority message is specified, the
O_NONBLOCK flag is set, and the STREAM write
queue is full due to internal flow control
conditions.
EAGAIN or ENOSR
Buffers cannot be allocated for the message
that is to be created.
EINVAL One of the following:
-- The fildes member of the strfdinsert
structure is not a valid, open STREAM
file descriptor.
-- The size of a t_uscalar_t plus offset
is greater than the len member for
the buffer specified through ctlbuf.
-- The offset member does not specify a
properly-aligned location in the data
buffer.
-- An undefined value is stored in
flags.
ENXIO Hangup received on the STREAM identified by
either the fildes argument or the fildes
member of the strfdinsert structure.
ERANGE The len member for the buffer specified
through databuf does not fall within the range
specified by the maximum and minimum packet
sizes of the topmost STREAM module; or the len
member for the buffer specified through
databuf is larger than the maximum configured
size of the data part of a message; or the len
member for the buffer specified through ctlbuf
is larger than the maximum configured size of
the control part of a message.
I_STR Constructs an internal STREAMS ioctl() message from
the data pointed to by arg, and sends that message
downstream.
This mechanism is provided to send ioctl() requests
to downstream modules and drivers. It allows
information to be sent with ioctl(), and returns to
the process any information sent upstream by the
downstream recipient. I_STR shall block until the
system responds with either a positive or negative
acknowledgement message, or until the request times
out after some period of time. If the request times
out, it shall fail with errno set to [ETIME].
At most, one I_STR can be active on a STREAM. Further
I_STR calls shall block until the active I_STR
completes at the STREAM head. The default timeout
interval for these requests is 15 seconds. The
O_NONBLOCK flag has no effect on this call.
To send requests downstream, the application shall
ensure that arg points to a strioctl structure.
The ic_cmd member is the internal ioctl() command
intended for a downstream module or driver and
ic_timout is the number of seconds (-1=infinite,
0=use implementation-defined timeout interval, >0=as
specified) an I_STR request shall wait for
acknowledgement before timing out. ic_len is the
number of bytes in the data argument, and ic_dp is a
pointer to the data argument. The ic_len member has
two uses: on input, it contains the length of the
data argument passed in, and on return from the
command, it contains the number of bytes being
returned to the process (the buffer pointed to by
ic_dp should be large enough to contain the maximum
amount of data that any module or the driver in the
STREAM can return).
The STREAM head shall convert the information pointed
to by the strioctl structure to an internal ioctl()
command message and send it downstream.
The ioctl() function with the I_STR command shall
fail if:
EAGAIN or ENOSR
Unable to allocate buffers for the ioctl()
message.
EINVAL The ic_len member is less than 0 or larger
than the maximum configured size of the data
part of a message, or ic_timout is less than
-1.
ENXIO Hangup received on fildes.
ETIME A downstream ioctl() timed out before
acknowledgement was received.
An I_STR can also fail while waiting for an
acknowledgement if a message indicating an error or a
hangup is received at the STREAM head. In addition,
an error code can be returned in the positive or
negative acknowledgement message, in the event the
ioctl() command sent downstream fails. For these
cases, I_STR shall fail with errno set to the value
in the message.
I_SWROPT Sets the write mode using the value of the argument
arg. Valid bit settings for arg are:
SNDZERO Send a zero-length message downstream
when a write() of 0 bytes occurs. To not
send a zero-length message when a write()
of 0 bytes occurs, the application shall
ensure that this bit is not set in arg
(for example, arg would be set to 0).
The ioctl() function with the I_SWROPT command shall
fail if:
EINVAL arg is not the above value.
I_GWROPT Returns the current write mode setting, as described
above, in the int that is pointed to by the argument
arg.
I_SENDFD Creates a new reference to the open file description
associated with the file descriptor arg, and writes a
message on the STREAMS-based pipe fildes containing
this reference, together with the user ID and group
ID of the calling process.
The ioctl() function with the I_SENDFD command shall
fail if:
EAGAIN The sending STREAM is unable to allocate a
message block to contain the file pointer; or
the read queue of the receiving STREAM head is
full and cannot accept the message sent by
I_SENDFD.
EBADF The arg argument is not a valid, open file
descriptor.
EINVAL The fildes argument is not connected to a
STREAM pipe.
ENXIO Hangup received on fildes.
The ioctl() function with the I_SENDFD command may
fail if:
EINVAL The arg argument is equal to the fildes
argument.
I_RECVFD Retrieves the reference to an open file description
from a message written to a STREAMS-based pipe using
the I_SENDFD command, and allocates a new file
descriptor in the calling process that refers to this
open file description. The arg argument is a pointer
to a strrecvfd data structure as defined in
<stropts.h>.
The fd member is a file descriptor. The uid and gid
members are the effective user ID and effective group
ID, respectively, of the sending process.
If O_NONBLOCK is not set, I_RECVFD shall block until
a message is present at the STREAM head. If
O_NONBLOCK is set, I_RECVFD shall fail with errno set
to [EAGAIN] if no message is present at the STREAM
head.
If the message at the STREAM head is a message sent
by an I_SENDFD, a new file descriptor shall be
allocated for the open file descriptor referenced in
the message. The new file descriptor is placed in the
fd member of the strrecvfd structure pointed to by
arg.
The ioctl() function with the I_RECVFD command shall
fail if:
EAGAIN A message is not present at the STREAM head
read queue and the O_NONBLOCK flag is set.
EBADMSG
The message at the STREAM head read queue is
not a message containing a passed file
descriptor.
EMFILE All file descriptors available to the process
are currently open.
ENXIO Hangup received on fildes.
I_LIST Allows the process to list all the module names on
the STREAM, up to and including the topmost driver
name. If arg is a null pointer, the return value
shall be the number of modules, including the driver,
that are on the STREAM pointed to by fildes. This
lets the process allocate enough space for the module
names. Otherwise, it should point to a str_list
structure.
The sl_nmods member indicates the number of entries
the process has allocated in the array. Upon return,
the sl_modlist member of the str_list structure shall
contain the list of module names, and the number of
entries that have been filled into the sl_modlist
array is found in the sl_nmods member (the number
includes the number of modules including the driver).
The return value from ioctl() shall be 0. The entries
are filled in starting at the top of the STREAM and
continuing downstream until either the end of the
STREAM is reached, or the number of requested modules
(sl_nmods) is satisfied.
The ioctl() function with the I_LIST command shall
fail if:
EINVAL The sl_nmods member is less than 1.
EAGAIN or ENOSR
Unable to allocate buffers.
I_ATMARK Allows the process to see if the message at the head
of the STREAM head read queue is marked by some
module downstream. The arg argument determines how
the checking is done when there may be multiple
marked messages on the STREAM head read queue. It may
take on the following values:
ANYMARK Check if the message is marked.
LASTMARK Check if the message is the last one
marked on the queue.
The bitwise-inclusive OR of the flags ANYMARK and
LASTMARK is permitted.
The return value shall be 1 if the mark condition is
satisfied; otherwise, the value shall be 0.
The ioctl() function with the I_ATMARK command shall
fail if:
EINVAL Invalid arg value.
I_CKBAND Checks if the message of a given priority band exists
on the STREAM head read queue. This shall return 1 if
a message of the given priority exists, 0 if no such
message exists, or -1 on error. arg should be of
type int.
The ioctl() function with the I_CKBAND command shall
fail if:
EINVAL Invalid arg value.
I_GETBAND Returns the priority band of the first message on the
STREAM head read queue in the integer referenced by
arg.
The ioctl() function with the I_GETBAND command shall
fail if:
ENODATA
No message on the STREAM head read queue.
I_CANPUT Checks if a certain band is writable. arg is set to
the priority band in question. The return value shall
be 0 if the band is flow-controlled, 1 if the band is
writable, or -1 on error.
The ioctl() function with the I_CANPUT command shall
fail if:
EINVAL Invalid arg value.
I_SETCLTIME This request allows the process to set the time the
STREAM head shall delay when a STREAM is closing and
there is data on the write queues. Before closing
each module or driver, if there is data on its write
queue, the STREAM head shall delay for the specified
amount of time to allow the data to drain. If, after
the delay, data is still present, it shall be
flushed. The arg argument is a pointer to an integer
specifying the number of milliseconds to delay,
rounded up to the nearest valid value. If I_SETCLTIME
is not performed on a STREAM, an implementation-
defined default timeout interval is used.
The ioctl() function with the I_SETCLTIME command
shall fail if:
EINVAL Invalid arg value.
I_GETCLTIME Returns the close time delay in the integer pointed
to by arg.
Multiplexed STREAMS Configurations
The following commands are used for connecting and disconnecting
multiplexed STREAMS configurations. These commands use an
implementation-defined default timeout interval.
I_LINK Connects two STREAMs, where fildes is the file
descriptor of the STREAM connected to the
multiplexing driver, and arg is the file descriptor
of the STREAM connected to another driver. The STREAM
designated by arg is connected below the multiplexing
driver. I_LINK requires the multiplexing driver to
send an acknowledgement message to the STREAM head
regarding the connection. This call shall return a
multiplexer ID number (an identifier used to
disconnect the multiplexer; see I_UNLINK) on success,
and -1 on failure.
The ioctl() function with the I_LINK command shall
fail if:
ENXIO Hangup received on fildes.
ETIME Timeout before acknowledgement message was
received at STREAM head.
EAGAIN or ENOSR
Unable to allocate STREAMS storage to perform
the I_LINK.
EBADF The arg argument is not a valid, open file
descriptor.
EINVAL The fildes argument does not support
multiplexing; or arg is not a STREAM or is
already connected downstream from a
multiplexer; or the specified I_LINK operation
would connect the STREAM head in more than one
place in the multiplexed STREAM.
An I_LINK can also fail while waiting for the
multiplexing driver to acknowledge the request, if a
message indicating an error or a hangup is received
at the STREAM head of fildes. In addition, an error
code can be returned in the positive or negative
acknowledgement message. For these cases, I_LINK
fails with errno set to the value in the message.
I_UNLINK Disconnects the two STREAMs specified by fildes and
arg. fildes is the file descriptor of the STREAM
connected to the multiplexing driver. The arg
argument is the multiplexer ID number that was
returned by the I_LINK ioctl() command when a STREAM
was connected downstream from the multiplexing
driver. If arg is MUXID_ALL, then all STREAMs that
were connected to fildes shall be disconnected. As in
I_LINK, this command requires acknowledgement.
The ioctl() function with the I_UNLINK command shall
fail if:
ENXIO Hangup received on fildes.
ETIME Timeout before acknowledgement message was
received at STREAM head.
EAGAIN or ENOSR
Unable to allocate buffers for the
acknowledgement message.
EINVAL Invalid multiplexer ID number.
An I_UNLINK can also fail while waiting for the
multiplexing driver to acknowledge the request if a
message indicating an error or a hangup is received
at the STREAM head of fildes. In addition, an error
code can be returned in the positive or negative
acknowledgement message. For these cases, I_UNLINK
shall fail with errno set to the value in the
message.
I_PLINK Creates a persistent connection between two STREAMs,
where fildes is the file descriptor of the STREAM
connected to the multiplexing driver, and arg is the
file descriptor of the STREAM connected to another
driver. This call shall create a persistent
connection which can exist even if the file
descriptor fildes associated with the upper STREAM to
the multiplexing driver is closed. The STREAM
designated by arg gets connected via a persistent
connection below the multiplexing driver. I_PLINK
requires the multiplexing driver to send an
acknowledgement message to the STREAM head. This call
shall return a multiplexer ID number (an identifier
that may be used to disconnect the multiplexer; see
I_PUNLINK) on success, and -1 on failure.
The ioctl() function with the I_PLINK command shall
fail if:
ENXIO Hangup received on fildes.
ETIME Timeout before acknowledgement message was
received at STREAM head.
EAGAIN or ENOSR
Unable to allocate STREAMS storage to perform
the I_PLINK.
EBADF The arg argument is not a valid, open file
descriptor.
EINVAL The fildes argument does not support
multiplexing; or arg is not a STREAM or is
already connected downstream from a
multiplexer; or the specified I_PLINK
operation would connect the STREAM head in
more than one place in the multiplexed STREAM.
An I_PLINK can also fail while waiting for the
multiplexing driver to acknowledge the request, if a
message indicating an error or a hangup is received
at the STREAM head of fildes. In addition, an error
code can be returned in the positive or negative
acknowledgement message. For these cases, I_PLINK
shall fail with errno set to the value in the
message.
I_PUNLINK Disconnects the two STREAMs specified by fildes and
arg from a persistent connection. The fildes argument
is the file descriptor of the STREAM connected to the
multiplexing driver. The arg argument is the
multiplexer ID number that was returned by the
I_PLINK ioctl() command when a STREAM was connected
downstream from the multiplexing driver. If arg is
MUXID_ALL, then all STREAMs which are persistent
connections to fildes shall be disconnected. As in
I_PLINK, this command requires the multiplexing
driver to acknowledge the request.
The ioctl() function with the I_PUNLINK command shall
fail if:
ENXIO Hangup received on fildes.
ETIME Timeout before acknowledgement message was
received at STREAM head.
EAGAIN or ENOSR
Unable to allocate buffers for the
acknowledgement message.
EINVAL Invalid multiplexer ID number.
An I_PUNLINK can also fail while waiting for the
multiplexing driver to acknowledge the request if a
message indicating an error or a hangup is received
at the STREAM head of fildes. In addition, an error
code can be returned in the positive or negative
acknowledgement message. For these cases, I_PUNLINK
shall fail with errno set to the value in the
message.
Upon successful completion, ioctl() shall return a value other
than -1 that depends upon the STREAMS device control function.
Otherwise, it shall return -1 and set errno to indicate the
error.
Under the following general conditions, ioctl() shall fail if:
EBADF The fildes argument is not a valid open file descriptor.
EINTR A signal was caught during the ioctl() operation.
EINVAL The STREAM or multiplexer referenced by fildes is linked
(directly or indirectly) downstream from a multiplexer.
If an underlying device driver detects an error, then ioctl()
shall fail if:
EINVAL The request or arg argument is not valid for this device.
EIO Some physical I/O error has occurred.
ENOTTY The file associated with the fildes argument is not a
STREAMS device that accepts control functions.
ENXIO The request and arg arguments are valid for this device
driver, but the service requested cannot be performed on
this particular sub-device.
ENODEV The fildes argument refers to a valid STREAMS device, but
the corresponding device driver does not support the
ioctl() function.
If a STREAM is connected downstream from a multiplexer, any
ioctl() command except I_UNLINK and I_PUNLINK shall set errno to
[EINVAL].
The following sections are informative.
None.
The implementation-defined timeout interval for STREAMS has
historically been 15 seconds.
None.
The ioctl() function may be removed in a future version.
Section 2.6, STREAMS, close(3p), fcntl(3p), getmsg(3p), open(3p),
pipe(3p), poll(3p), putmsg(3p), read(3p), sigaction(3p),
write(3p)
The Base Definitions volume of POSIX.1‐2017, stropts.h(0p)
Portions of this text are reprinted and reproduced in electronic
form from IEEE Std 1003.1-2017, Standard for Information
Technology -- Portable Operating System Interface (POSIX), The
Open Group Base Specifications Issue 7, 2018 Edition, Copyright
(C) 2018 by the Institute of Electrical and Electronics
Engineers, Inc and The Open Group. In the event of any
discrepancy between this version and the original IEEE and The
Open Group Standard, the original IEEE and The Open Group
Standard is the referee document. The original Standard can be
obtained online at http://www.opengroup.org/unix/online.html .
Any typographical or formatting errors that appear in this page
are most likely to have been introduced during the conversion of
the source files to man page format. To report such errors, see
https://www.kernel.org/doc/man-pages/reporting_bugs.html .
IEEE/The Open Group 2017 IOCTL(3P)
Pages that refer to this page: signal.h(0p), stropts.h(0p), close(3p), read(3p)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|