|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SPECIFYING REVISIONS | SPECIFYING RANGES | REVISION RANGE SUMMARY | PARSEOPT | SQ-QUOTE | EXAMPLES | GIT | COLOPHON |
|
|
|
GIT-REV-PARSE(1) Git Manual GIT-REV-PARSE(1)
git-rev-parse - Pick out and massage parameters
git rev-parse [<options>] <arg>...
Many Git porcelainish commands take a mixture of flags (i.e.
parameters that begin with a dash -) and parameters meant for the
underlying git rev-list command they use internally and flags and
parameters for the other commands they use downstream of git
rev-list. The primary purpose of this command is to allow calling
programs to distinguish between them. There are a few other
operation modes that have nothing to do with the above "help
parse command line options".
Unless otherwise specified, most of the options and operation
modes require you to run this command inside a git repository or
a working tree that is under the control of a git repository, and
will give you a fatal error otherwise.
Operation Modes
Each of these options must appear first on the command line.
--parseopt
Use git rev-parse in option parsing mode (see PARSEOPT
section below). The command in this mode can be used outside
a repository or a working tree controlled by a repository.
--sq-quote
Use git rev-parse in shell quoting mode (see SQ-QUOTE section
below). In contrast to the --sq option below, this mode only
does quoting. Nothing else is done to command input. The
command in this mode can be used outside a repository or a
working tree controlled by a repository.
Options for --parseopt
--keep-dashdash
Only meaningful in --parseopt mode. Tells the option parser
to echo out the first -- met instead of skipping it.
--stop-at-non-option
Only meaningful in --parseopt mode. Lets the option parser
stop at the first non-option argument. This can be used to
parse sub-commands that take options themselves.
--stuck-long
Only meaningful in --parseopt mode. Output the options in
their long form if available, and with their arguments stuck.
Options for Filtering
--revs-only
Do not output flags and parameters not meant for git rev-list
command.
--no-revs
Do not output flags and parameters meant for git rev-list
command.
--flags
Do not output non-flag parameters.
--no-flags
Do not output flag parameters.
Options for Output
--default <arg>
If there is no parameter given by the user, use <arg>
instead.
--prefix <arg>
Behave as if git rev-parse was invoked from the <arg>
subdirectory of the working tree. Any relative filenames are
resolved as if they are prefixed by <arg> and will be printed
in that form.
This can be used to convert arguments to a command run in a
subdirectory so that they can still be used after moving to
the top-level of the repository. For example:
prefix=$(git rev-parse --show-prefix)
cd "$(git rev-parse --show-toplevel)"
# rev-parse provides the -- needed for 'set'
eval "set $(git rev-parse --sq --prefix "$prefix" -- "$@")"
--verify
Verify that exactly one parameter is provided, and that it
can be turned into a raw 20-byte SHA-1 that can be used to
access the object database. If so, emit it to the standard
output; otherwise, error out.
If you want to make sure that the output actually names an
object in your object database and/or can be used as a
specific type of object you require, you can add the ^{type}
peeling operator to the parameter. For example, git rev-parse
"$VAR^{commit}" will make sure $VAR names an existing object
that is a commit-ish (i.e. a commit, or an annotated tag that
points at a commit). To make sure that $VAR names an existing
object of any type, git rev-parse "$VAR^{object}" can be
used.
Note that if you are verifying a name from an untrusted
source, it is wise to use --end-of-options so that the name
argument is not mistaken for another option.
-q, --quiet
Only meaningful in --verify mode. Do not output an error
message if the first argument is not a valid object name;
instead exit with non-zero status silently. SHA-1s for valid
object names are printed to stdout on success.
--sq
Usually the output is made one line per flag and parameter.
This option makes output a single line, properly quoted for
consumption by shell. Useful when you expect your parameter
to contain whitespaces and newlines (e.g. when using pickaxe
-S with git diff-*). In contrast to the --sq-quote option,
the command input is still interpreted as usual.
--short[=<length>]
Same as --verify but shortens the object name to a unique
prefix with at least length characters. The minimum length is
4, the default is the effective value of the core.abbrev
configuration variable (see git-config(1)).
--not
When showing object names, prefix them with ^ and strip ^
prefix from the object names that already have one.
--abbrev-ref[=(strict|loose)]
A non-ambiguous short name of the objects name. The option
core.warnAmbiguousRefs is used to select the strict
abbreviation mode.
--symbolic
Usually the object names are output in SHA-1 form (with
possible ^ prefix); this option makes them output in a form
as close to the original input as possible.
--symbolic-full-name
This is similar to --symbolic, but it omits input that are
not refs (i.e. branch or tag names; or more explicitly
disambiguating "heads/master" form, when you want to name the
"master" branch when there is an unfortunately named tag
"master"), and shows them as full refnames (e.g.
"refs/heads/master").
--output-object-format=(sha1|sha256|storage)
Allow oids to be input from any object format that the
current repository supports.
Specifying "sha1" translates if necessary and returns a sha1 oid.
Specifying "sha256" translates if necessary and returns a sha256 oid.
Specifying "storage" translates if necessary and returns an oid in
encoded in the storage hash algorithm.
Options for Objects
--all
Show all refs found in refs/.
--branches[=<pattern>], --tags[=<pattern>], --remotes[=<pattern>]
Show all branches, tags, or remote-tracking branches,
respectively (i.e., refs found in refs/heads, refs/tags, or
refs/remotes, respectively).
If a pattern is given, only refs matching the given shell
glob are shown. If the pattern does not contain a globbing
character (?, *, or [), it is turned into a prefix match by
appending /*.
--glob=<pattern>
Show all refs matching the shell glob pattern pattern. If the
pattern does not start with refs/, this is automatically
prepended. If the pattern does not contain a globbing
character (?, *, or [), it is turned into a prefix match by
appending /*.
--exclude=<glob-pattern>
Do not include refs matching <glob-pattern> that the next
--all, --branches, --tags, --remotes, or --glob would
otherwise consider. Repetitions of this option accumulate
exclusion patterns up to the next --all, --branches, --tags,
--remotes, or --glob option (other options or arguments do
not clear accumulated patterns).
The patterns given should not begin with refs/heads,
refs/tags, or refs/remotes when applied to --branches,
--tags, or --remotes, respectively, and they must begin with
refs/ when applied to --glob or --all. If a trailing /* is
intended, it must be given explicitly.
--exclude-hidden=(fetch|receive|uploadpack)
Do not include refs that would be hidden by git-fetch,
git-receive-pack or git-upload-pack by consulting the
appropriate fetch.hideRefs, receive.hideRefs or
uploadpack.hideRefs configuration along with
transfer.hideRefs (see git-config(1)). This option affects
the next pseudo-ref option --all or --glob and is cleared
after processing them.
--disambiguate=<prefix>
Show every object whose name begins with the given prefix.
The <prefix> must be at least 4 hexadecimal digits long to
avoid listing each and every object in the repository by
mistake.
Options for Files
--local-env-vars
List the GIT_* environment variables that are local to the
repository (e.g. GIT_DIR or GIT_WORK_TREE, but not
GIT_EDITOR). Only the names of the variables are listed, not
their value, even if they are set.
--path-format=(absolute|relative)
Controls the behavior of certain other options. If specified
as absolute, the paths printed by those options will be
absolute and canonical. If specified as relative, the paths
will be relative to the current working directory if that is
possible. The default is option specific.
This option may be specified multiple times and affects only
the arguments that follow it on the command line, either to
the end of the command line or the next instance of this
option.
The following options are modified by --path-format:
--git-dir
Show $GIT_DIR if defined. Otherwise show the path to the .git
directory. The path shown, when relative, is relative to the
current working directory.
If $GIT_DIR is not defined and the current directory is not
detected to lie in a Git repository or work tree print a
message to stderr and exit with nonzero status.
--git-common-dir
Show $GIT_COMMON_DIR if defined, else $GIT_DIR.
--resolve-git-dir <path>
Check if <path> is a valid repository or a gitfile that
points at a valid repository, and print the location of the
repository. If <path> is a gitfile then the resolved path to
the real repository is printed.
--git-path <path>
Resolve "$GIT_DIR/<path>" and takes other path relocation
variables such as $GIT_OBJECT_DIRECTORY, $GIT_INDEX_FILE...
into account. For example, if $GIT_OBJECT_DIRECTORY is set to
/foo/bar then "git rev-parse --git-path objects/abc" returns
/foo/bar/abc.
--show-toplevel
Show the (by default, absolute) path of the top-level
directory of the working tree. If there is no working tree,
report an error.
--show-superproject-working-tree
Show the absolute path of the root of the superproject’s
working tree (if exists) that uses the current repository as
its submodule. Outputs nothing if the current repository is
not used as a submodule by any project.
--shared-index-path
Show the path to the shared index file in split index mode,
or empty if not in split-index mode.
The following options are unaffected by --path-format:
--absolute-git-dir
Like --git-dir, but its output is always the canonicalized
absolute path.
--is-inside-git-dir
When the current working directory is below the repository
directory print "true", otherwise "false".
--is-inside-work-tree
When the current working directory is inside the work tree of
the repository print "true", otherwise "false".
--is-bare-repository
When the repository is bare print "true", otherwise "false".
--is-shallow-repository
When the repository is shallow print "true", otherwise
"false".
--show-cdup
When the command is invoked from a subdirectory, show the
path of the top-level directory relative to the current
directory (typically a sequence of "../", or an empty
string).
--show-prefix
When the command is invoked from a subdirectory, show the
path of the current directory relative to the top-level
directory.
--show-object-format[=(storage|input|output)]
Show the object format (hash algorithm) used for the
repository for storage inside the .git directory, input, or
output. For input, multiple algorithms may be printed,
space-separated. If not specified, the default is "storage".
--show-ref-format
Show the reference storage format used for the repository.
Other Options
--since=<datestring>, --after=<datestring>
Parse the date string, and output the corresponding
--max-age= parameter for git rev-list.
--until=<datestring>, --before=<datestring>
Parse the date string, and output the corresponding
--min-age= parameter for git rev-list.
<arg>...
Flags and parameters to be parsed.
A revision parameter <rev> typically, but not necessarily, names
a commit object. It uses what is called an extended SHA-1 syntax.
Here are various ways to spell object names. The ones listed near
the end of this list name trees and blobs contained in a commit.
Note
This document shows the "raw" syntax as seen by git. The
shell and other UIs might require additional quoting to
protect special characters and to avoid word splitting.
<sha1>, e.g. dae86e1950b1277e545cee180551750029cfe735, dae86e
The full SHA-1 object name (40-byte hexadecimal string), or a
leading substring that is unique within the repository. E.g.
dae86e1950b1277e545cee180551750029cfe735 and dae86e both name
the same commit object if there is no other object in your
repository whose object name starts with dae86e.
<describeOutput>, e.g. v1.7.4.2-679-g3bee7fb
Output from git describe; i.e. a closest tag, optionally
followed by a dash and a number of commits, followed by a
dash, a g, and an abbreviated object name.
<refname>, e.g. master, heads/master, refs/heads/master
A symbolic ref name. E.g. master typically means the commit
object referenced by refs/heads/master. If you happen to have
both heads/master and tags/master, you can explicitly say
heads/master to tell Git which one you mean. When ambiguous,
a <refname> is disambiguated by taking the first match in the
following rules:
1. If $GIT_DIR/<refname> exists, that is what you mean (this
is usually useful only for HEAD, FETCH_HEAD, ORIG_HEAD,
MERGE_HEAD, REBASE_HEAD, REVERT_HEAD, CHERRY_PICK_HEAD,
BISECT_HEAD and AUTO_MERGE);
2. otherwise, refs/<refname> if it exists;
3. otherwise, refs/tags/<refname> if it exists;
4. otherwise, refs/heads/<refname> if it exists;
5. otherwise, refs/remotes/<refname> if it exists;
6. otherwise, refs/remotes/<refname>/HEAD if it exists.
HEAD
names the commit on which you based the changes in the
working tree.
FETCH_HEAD
records the branch which you fetched from a remote
repository with your last git fetch invocation.
ORIG_HEAD
is created by commands that move your HEAD in a drastic
way (git am, git merge, git rebase, git reset), to record
the position of the HEAD before their operation, so that
you can easily change the tip of the branch back to the
state before you ran them.
MERGE_HEAD
records the commit(s) which you are merging into your
branch when you run git merge.
REBASE_HEAD
during a rebase, records the commit at which the
operation is currently stopped, either because of
conflicts or an edit command in an interactive rebase.
REVERT_HEAD
records the commit which you are reverting when you run
git revert.
CHERRY_PICK_HEAD
records the commit which you are cherry-picking when you
run git cherry-pick.
BISECT_HEAD
records the current commit to be tested when you run git
bisect --no-checkout.
AUTO_MERGE
records a tree object corresponding to the state the ort
merge strategy wrote to the working tree when a merge
operation resulted in conflicts.
Note that any of the refs/* cases above may come either from
the $GIT_DIR/refs directory or from the $GIT_DIR/packed-refs
file. While the ref name encoding is unspecified, UTF-8 is
preferred as some output processing may assume ref names in
UTF-8.
@
@ alone is a shortcut for HEAD.
[<refname>]@{<date>}, e.g. master@{yesterday}, HEAD@{5 minutes
ago}
A ref followed by the suffix @ with a date specification
enclosed in a brace pair (e.g. {yesterday}, {1 month 2 weeks
3 days 1 hour 1 second ago} or {1979-02-26 18:30:00})
specifies the value of the ref at a prior point in time. This
suffix may only be used immediately following a ref name and
the ref must have an existing log ($GIT_DIR/logs/<ref>). Note
that this looks up the state of your local ref at a given
time; e.g., what was in your local master branch last week.
If you want to look at commits made during certain times, see
--since and --until.
<refname>@{<n>}, e.g. master@{1}
A ref followed by the suffix @ with an ordinal specification
enclosed in a brace pair (e.g. {1}, {15}) specifies the n-th
prior value of that ref. For example master@{1} is the
immediate prior value of master while master@{5} is the 5th
prior value of master. This suffix may only be used
immediately following a ref name and the ref must have an
existing log ($GIT_DIR/logs/<refname>).
@{<n>}, e.g. @{1}
You can use the @ construct with an empty ref part to get at
a reflog entry of the current branch. For example, if you are
on branch blabla then @{1} means the same as blabla@{1}.
@{-<n>}, e.g. @{-1}
The construct @{-<n>} means the <n>th branch/commit checked
out before the current one.
[<branchname>]@{upstream}, e.g. master@{upstream}, @{u}
A branch B may be set up to build on top of a branch X
(configured with branch.<name>.merge) at a remote R
(configured with the branch X taken from remote R, typically
found at refs/remotes/R/X.
[<branchname>]@{push}, e.g. master@{push}, @{push}
The suffix @{push} reports the branch "where we would push
to" if git push were run while branchname was checked out (or
the current HEAD if no branchname is specified). Like for
@{upstream}, we report the remote-tracking branch that
corresponds to that branch at the remote.
Here’s an example to make it more clear:
$ git config push.default current
$ git config remote.pushdefault myfork
$ git switch -c mybranch origin/master
$ git rev-parse --symbolic-full-name @{upstream}
refs/remotes/origin/master
$ git rev-parse --symbolic-full-name @{push}
refs/remotes/myfork/mybranch
Note in the example that we set up a triangular workflow,
where we pull from one location and push to another. In a
non-triangular workflow, @{push} is the same as @{upstream},
and there is no need for it.
This suffix is also accepted when spelled in uppercase, and
means the same thing no matter the case.
<rev>^[<n>], e.g. HEAD^, v1.5.1^0
A suffix ^ to a revision parameter means the first parent of
that commit object. ^<n> means the <n>th parent (i.e.
<rev>^ is equivalent to <rev>^1). As a special rule, <rev>^0
means the commit itself and is used when <rev> is the object
name of a tag object that refers to a commit object.
<rev>~[<n>], e.g. HEAD~, master~3
A suffix ~ to a revision parameter means the first parent of
that commit object. A suffix ~<n> to a revision parameter
means the commit object that is the <n>th generation ancestor
of the named commit object, following only the first parents.
I.e. <rev>~3 is equivalent to <rev>^^^ which is equivalent
to <rev>^1^1^1. See below for an illustration of the usage of
this form.
<rev>^{<type>}, e.g. v0.99.8^{commit}
A suffix ^ followed by an object type name enclosed in brace
pair means dereference the object at <rev> recursively until
an object of type <type> is found or the object cannot be
dereferenced anymore (in which case, barf). For example, if
<rev> is a commit-ish, <rev>^{commit} describes the
corresponding commit object. Similarly, if <rev> is a
tree-ish, <rev>^{tree} describes the corresponding tree
object. <rev>^0 is a short-hand for <rev>^{commit}.
<rev>^{object} can be used to make sure <rev> names an object
that exists, without requiring <rev> to be a tag, and without
dereferencing <rev>; because a tag is already an object, it
does not have to be dereferenced even once to get to an
object.
<rev>^{tag} can be used to ensure that <rev> identifies an
existing tag object.
<rev>^{}, e.g. v0.99.8^{}
A suffix ^ followed by an empty brace pair means the object
could be a tag, and dereference the tag recursively until a
non-tag object is found.
<rev>^{/<text>}, e.g. HEAD^{/fix nasty bug}
A suffix ^ to a revision parameter, followed by a brace pair
that contains a text led by a slash, is the same as the :/fix
nasty bug syntax below except that it returns the youngest
matching commit which is reachable from the <rev> before ^.
:/<text>, e.g. :/fix nasty bug
A colon, followed by a slash, followed by a text, names a
commit whose commit message matches the specified regular
expression. This name returns the youngest matching commit
which is reachable from any ref, including HEAD. The regular
expression can match any part of the commit message. To match
messages starting with a string, one can use e.g. :/^foo.
The special sequence :/! is reserved for modifiers to what
is matched. :/!-foo performs a negative match, while :/!!foo
matches a literal ! character, followed by foo. Any other
sequence beginning with :/! is reserved for now. Depending
on the given text, the shell’s word splitting rules might
require additional quoting.
<rev>:<path>, e.g. HEAD:README, master:./README
A suffix : followed by a path names the blob or tree at the
given path in the tree-ish object named by the part before
the colon. A path starting with ./ or ../ is relative to the
current working directory. The given path will be converted
to be relative to the working tree’s root directory. This is
most useful to address a blob or tree from a commit or tree
that has the same tree structure as the working tree.
:[<n>:]<path>, e.g. :0:README, :README
A colon, optionally followed by a stage number (0 to 3) and a
colon, followed by a path, names a blob object in the index
at the given path. A missing stage number (and the colon that
follows it) names a stage 0 entry. During a merge, stage 1 is
the common ancestor, stage 2 is the target branch’s version
(typically the current branch), and stage 3 is the version
from the branch which is being merged.
Here is an illustration, by Jon Loeliger. Both commit nodes B and
C are parents of commit node A. Parent commits are ordered
left-to-right.
G H I J
\ / \ /
D E F
\ | / \
\ | / |
\|/ |
B C
\ /
\ /
A
A = = A^0
B = A^ = A^1 = A~1
C = = A^2
D = A^^ = A^1^1 = A~2
E = B^2 = A^^2
F = B^3 = A^^3
G = A^^^ = A^1^1^1 = A~3
H = D^2 = B^^2 = A^^^2 = A~2^2
I = F^ = B^3^ = A^^3^
J = F^2 = B^3^2 = A^^3^2
History traversing commands such as git log operate on a set of
commits, not just a single commit.
For these commands, specifying a single revision, using the
notation described in the previous section, means the set of
commits reachable from the given commit.
Specifying several revisions means the set of commits reachable
from any of the given commits.
A commit’s reachable set is the commit itself and the commits in
its ancestry chain.
There are several notations to specify a set of connected commits
(called a "revision range"), illustrated below.
Commit Exclusions
^<rev> (caret) Notation
To exclude commits reachable from a commit, a prefix ^
notation is used. E.g. ^r1 r2 means commits reachable from
r2 but exclude the ones reachable from r1 (i.e. r1 and its
ancestors).
Dotted Range Notations
The .. (two-dot) Range Notation
The ^r1 r2 set operation appears so often that there is a
shorthand for it. When you have two commits r1 and r2 (named
according to the syntax explained in SPECIFYING REVISIONS
above), you can ask for commits that are reachable from r2
excluding those that are reachable from r1 by ^r1 r2 and it
can be written as r1..r2.
The ... (three-dot) Symmetric Difference Notation
A similar notation r1...r2 is called symmetric difference of
r1 and r2 and is defined as r1 r2 --not $(git merge-base
--all r1 r2). It is the set of commits that are reachable
from either one of r1 (left side) or r2 (right side) but not
from both.
In these two shorthand notations, you can omit one end and let it
default to HEAD. For example, origin.. is a shorthand for
origin..HEAD and asks "What did I do since I forked from the
origin branch?" Similarly, ..origin is a shorthand for
HEAD..origin and asks "What did the origin do since I forked from
them?" Note that .. would mean HEAD..HEAD which is an empty range
that is both reachable and unreachable from HEAD.
Commands that are specifically designed to take two distinct
ranges (e.g. "git range-diff R1 R2" to compare two ranges) do
exist, but they are exceptions. Unless otherwise noted, all "git"
commands that operate on a set of commits work on a single
revision range. In other words, writing two "two-dot range
notation" next to each other, e.g.
$ git log A..B C..D
does not specify two revision ranges for most commands. Instead
it will name a single connected set of commits, i.e. those that
are reachable from either B or D but are reachable from neither A
or C. In a linear history like this:
---A---B---o---o---C---D
because A and B are reachable from C, the revision range
specified by these two dotted ranges is a single commit D.
Other <rev>^ Parent Shorthand Notations
Three other shorthands exist, particularly useful for merge
commits, for naming a set that is formed by a commit and its
parent commits.
The r1^@ notation means all parents of r1.
The r1^! notation includes commit r1 but excludes all of its
parents. By itself, this notation denotes the single commit r1.
The <rev>^-[<n>] notation includes <rev> but excludes the <n>th
parent (i.e. a shorthand for <rev>^<n>..<rev>), with <n> = 1 if
not given. This is typically useful for merge commits where you
can just pass <commit>^- to get all the commits in the branch
that was merged in merge commit <commit> (including <commit>
itself).
While <rev>^<n> was about specifying a single commit parent,
these three notations also consider its parents. For example you
can say HEAD^2^@, however you cannot say HEAD^@^2.
<rev>
Include commits that are reachable from <rev> (i.e. <rev> and
its ancestors).
^<rev>
Exclude commits that are reachable from <rev> (i.e. <rev> and
its ancestors).
<rev1>..<rev2>
Include commits that are reachable from <rev2> but exclude
those that are reachable from <rev1>. When either <rev1> or
<rev2> is omitted, it defaults to HEAD.
<rev1>...<rev2>
Include commits that are reachable from either <rev1> or
<rev2> but exclude those that are reachable from both. When
either <rev1> or <rev2> is omitted, it defaults to HEAD.
<rev>^@, e.g. HEAD^@
A suffix ^ followed by an at sign is the same as listing all
parents of <rev> (meaning, include anything reachable from
its parents, but not the commit itself).
<rev>^!, e.g. HEAD^!
A suffix ^ followed by an exclamation mark is the same as
giving commit <rev> and all its parents prefixed with ^ to
exclude them (and their ancestors).
<rev>^-<n>, e.g. HEAD^-, HEAD^-2
Equivalent to <rev>^<n>..<rev>, with <n> = 1 if not given.
Here are a handful of examples using the Loeliger illustration
above, with each step in the notation’s expansion and selection
carefully spelt out:
Args Expanded arguments Selected commits
D G H D
D F G H I J D F
^G D H D
^D B E I J F B
^D B C E I J F B C
C I J F C
B..C = ^B C C
B...C = B ^F C G H D E B C
B^- = B^..B
= ^B^1 B E I J F B
C^@ = C^1
= F I J F
B^@ = B^1 B^2 B^3
= D E F D G H E F I J
C^! = C ^C^@
= C ^C^1
= C ^F C
B^! = B ^B^@
= B ^B^1 ^B^2 ^B^3
= B ^D ^E ^F B
F^! D = F ^I ^J D G H D F
In --parseopt mode, git rev-parse helps massaging options to
bring to shell scripts the same facilities C builtins have. It
works as an option normalizer (e.g. splits single switches
aggregate values), a bit like getopt(1) does.
It takes on the standard input the specification of the options
to parse and understand, and echoes on the standard output a
string suitable for sh(1) eval to replace the arguments with
normalized ones. In case of error, it outputs usage on the
standard error stream, and exits with code 129.
Note: Make sure you quote the result when passing it to eval. See
below for an example.
Input Format
git rev-parse --parseopt input format is fully text based. It has
two parts, separated by a line that contains only --. The lines
before the separator (should be one or more) are used for the
usage. The lines after the separator describe the options.
Each line of options has this format:
<opt-spec><flags>*<arg-hint>? SP+ help LF
<opt-spec>
its format is the short option character, then the long
option name separated by a comma. Both parts are not
required, though at least one is necessary. May not contain
any of the <flags> characters. h,help, dry-run and f are
examples of correct <opt-spec>.
<flags>
<flags> are of *, =, ? or !.
• Use = if the option takes an argument.
• Use ? to mean that the option takes an optional
argument. You probably want to use the --stuck-long mode
to be able to unambiguously parse the optional argument.
• Use * to mean that this option should not be listed in
the usage generated for the -h argument. It’s shown for
--help-all as documented in gitcli(7).
• Use ! to not make the corresponding negated long option
available.
<arg-hint>
<arg-hint>, if specified, is used as a name of the argument
in the help output, for options that take arguments.
<arg-hint> is terminated by the first whitespace. It is
customary to use a dash to separate words in a multi-word
argument hint.
The remainder of the line, after stripping the spaces, is used as
the help associated with the option.
Blank lines are ignored, and lines that don’t match this
specification are used as option group headers (start the line
with a space to create such lines on purpose).
Example
OPTS_SPEC="\
some-command [<options>] <args>...
some-command does foo and bar!
--
h,help! show the help
foo some nifty option --foo
bar= some cool option --bar with an argument
baz=arg another cool option --baz with a named argument
qux?path qux may take a path argument but has meaning by itself
An option group Header
C? option C with an optional argument"
eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)"
Usage text
When "$@" is -h or --help in the above example, the following
usage text would be shown:
usage: some-command [<options>] <args>...
some-command does foo and bar!
-h, --help show the help
--[no-]foo some nifty option --foo
--[no-]bar ... some cool option --bar with an argument
--[no-]baz <arg> another cool option --baz with a named argument
--[no-]qux[=<path>] qux may take a path argument but has meaning by itself
An option group Header
-C[...] option C with an optional argument
In --sq-quote mode, git rev-parse echoes on the standard output a
single line suitable for sh(1) eval. This line is made by
normalizing the arguments following --sq-quote. Nothing other
than quoting the arguments is done.
If you want command input to still be interpreted as usual by git
rev-parse before the output is shell quoted, see the --sq option.
Example
$ cat >your-git-script.sh <<\EOF
#!/bin/sh
args=$(git rev-parse --sq-quote "$@") # quote user-supplied arguments
command="git frotz -n24 $args" # and use it inside a handcrafted
# command line
eval "$command"
EOF
$ sh your-git-script.sh "a b'c"
• Print the object name of the current commit:
$ git rev-parse --verify HEAD
• Print the commit object name from the revision in the $REV
shell variable:
$ git rev-parse --verify --end-of-options $REV^{commit}
This will error out if $REV is empty or not a valid revision.
• Similar to above:
$ git rev-parse --default master --verify --end-of-options $REV
but if $REV is empty, the commit object name from master will
be printed.
Part of the git(1) suite
This page is part of the git (Git distributed version control
system) project. Information about the project can be found at
⟨http://git-scm.com/⟩. If you have a bug report for this manual
page, see ⟨http://git-scm.com/community⟩. This page was obtained
from the project's upstream Git repository
⟨https://github.com/git/git.git⟩ on 2024-06-14. (At that time,
the date of the most recent commit that was found in the
repository was 2024-06-12.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Git 2.45.2.492.gd63586 2024-06-12 GIT-REV-PARSE(1)
Pages that refer to this page: git(1), git-cat-file(1), git-config(1), git-fsck(1), git-replay(1), git-send-pack(1), git-worktree(1), stg(1), gitrevisions(7)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|