|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | DELTA ISLANDS | CONFIGURATION | SEE ALSO | GIT | COLOPHON |
|
|
|
GIT-PACK-OBJECTS(1) Git Manual GIT-PACK-OBJECTS(1)
git-pack-objects - Create a packed archive of objects
git pack-objects [-q | --progress | --all-progress] [--all-progress-implied]
[--no-reuse-delta] [--delta-base-offset] [--non-empty]
[--local] [--incremental] [--window=<n>] [--depth=<n>]
[--revs [--unpacked | --all]] [--keep-pack=<pack-name>]
[--cruft] [--cruft-expiration=<time>]
[--stdout [--filter=<filter-spec>] | <base-name>]
[--shallow] [--keep-true-parents] [--[no-]sparse] < <object-list>
Reads list of objects from the standard input, and writes either
one or more packed archives with the specified base-name to disk,
or a packed archive to the standard output.
A packed archive is an efficient way to transfer a set of objects
between two repositories as well as an access efficient archival
format. In a packed archive, an object is either stored as a
compressed whole or as a difference from some other object. The
latter is often called a delta.
The packed archive format (.pack) is designed to be
self-contained so that it can be unpacked without any further
information. Therefore, each object that a delta depends upon
must be present within the pack.
A pack index file (.idx) is generated for fast, random access to
the objects in the pack. Placing both the index file (.idx) and
the packed archive (.pack) in the pack/ subdirectory of
$GIT_OBJECT_DIRECTORY (or any of the directories on
$GIT_ALTERNATE_OBJECT_DIRECTORIES) enables Git to read from the
pack archive.
The git unpack-objects command can read the packed archive and
expand the objects contained in the pack into "one-file
one-object" format; this is typically done by the smart-pull
commands when a pack is created on-the-fly for efficient network
transport by their peers.
base-name
Write into pairs of files (.pack and .idx), using <base-name>
to determine the name of the created file. When this option
is used, the two files in a pair are written in
<base-name>-<SHA-1>.{pack,idx} files. <SHA-1> is a hash based
on the pack content and is written to the standard output of
the command.
--stdout
Write the pack contents (what would have been written to
.pack file) out to the standard output.
--revs
Read the revision arguments from the standard input, instead
of individual object names. The revision arguments are
processed the same way as git rev-list with the --objects
flag uses its commit arguments to build the list of objects
it outputs. The objects on the resulting list are packed.
Besides revisions, --not or --shallow <SHA-1> lines are also
accepted.
--unpacked
This implies --revs. When processing the list of revision
arguments read from the standard input, limit the objects
packed to those that are not already packed.
--all
This implies --revs. In addition to the list of revision
arguments read from the standard input, pretend as if all
refs under refs/ are specified to be included.
--include-tag
Include unasked-for annotated tags if the object they
reference was included in the resulting packfile. This can be
useful to send new tags to native Git clients.
--stdin-packs
Read the basenames of packfiles (e.g., pack-1234abcd.pack)
from the standard input, instead of object names or revision
arguments. The resulting pack contains all objects listed in
the included packs (those not beginning with ^), excluding
any objects listed in the excluded packs (beginning with ^).
Incompatible with --revs, or options that imply --revs (such
as --all), with the exception of --unpacked, which is
compatible.
--cruft
Packs unreachable objects into a separate "cruft" pack,
denoted by the existence of a .mtimes file. Typically used by
git repack --cruft. Callers provide a list of pack names and
indicate which packs will remain in the repository, along
with which packs will be deleted (indicated by the - prefix).
The contents of the cruft pack are all objects not contained
in the surviving packs which have not exceeded the grace
period (see --cruft-expiration below), or which have exceeded
the grace period, but are reachable from an other object
which hasn’t.
When the input lists a pack containing all reachable objects
(and lists all other packs as pending deletion), the
corresponding cruft pack will contain all unreachable objects
(with mtime newer than the --cruft-expiration) along with any
unreachable objects whose mtime is older than the
--cruft-expiration, but are reachable from an unreachable
object whose mtime is newer than the --cruft-expiration).
Incompatible with --unpack-unreachable, --keep-unreachable,
--pack-loose-unreachable, --stdin-packs, as well as any other
options which imply --revs.
--cruft-expiration=<approxidate>
If specified, objects are eliminated from the cruft pack if
they have an mtime older than <approxidate>. If unspecified
(and given --cruft), then no objects are eliminated.
--window=<n>, --depth=<n>
These two options affect how the objects contained in the
pack are stored using delta compression. The objects are
first internally sorted by type, size and optionally names
and compared against the other objects within --window to see
if using delta compression saves space. --depth limits the
maximum delta depth; making it too deep affects the
performance on the unpacker side, because delta data needs to
be applied that many times to get to the necessary object.
The default value for --window is 10 and --depth is 50. The
maximum depth is 4095.
--window-memory=<n>
This option provides an additional limit on top of --window;
the window size will dynamically scale down so as to not take
up more than <n> bytes in memory. This is useful in
repositories with a mix of large and small objects to not run
out of memory with a large window, but still be able to take
advantage of the large window for the smaller objects. The
size can be suffixed with "k", "m", or "g".
--window-memory=0 makes memory usage unlimited. The default
is taken from the pack.windowMemory configuration variable.
--max-pack-size=<n>
In unusual scenarios, you may not be able to create files
larger than a certain size on your filesystem, and this
option can be used to tell the command to split the output
packfile into multiple independent packfiles, each not larger
than the given size. The size can be suffixed with "k", "m",
or "g". The minimum size allowed is limited to 1 MiB. The
default is unlimited, unless the config variable
pack.packSizeLimit is set. Note that this option may result
in a larger and slower repository; see the discussion in
pack.packSizeLimit.
--honor-pack-keep
This flag causes an object already in a local pack that has a
.keep file to be ignored, even if it would have otherwise
been packed.
--keep-pack=<pack-name>
This flag causes an object already in the given pack to be
ignored, even if it would have otherwise been packed.
<pack-name> is the pack file name without leading directory
(e.g. pack-123.pack). The option could be specified multiple
times to keep multiple packs.
--incremental
This flag causes an object already in a pack to be ignored
even if it would have otherwise been packed.
--local
This flag causes an object that is borrowed from an alternate
object store to be ignored even if it would have otherwise
been packed.
--non-empty
Only create a packed archive if it would contain at least one
object.
--progress
Progress status is reported on the standard error stream by
default when it is attached to a terminal, unless -q is
specified. This flag forces progress status even if the
standard error stream is not directed to a terminal.
--all-progress
When --stdout is specified then progress report is displayed
during the object count and compression phases but inhibited
during the write-out phase. The reason is that in some cases
the output stream is directly linked to another command which
may wish to display progress status of its own as it
processes incoming pack data. This flag is like --progress
except that it forces progress report for the write-out phase
as well even if --stdout is used.
--all-progress-implied
This is used to imply --all-progress whenever progress
display is activated. Unlike --all-progress this flag doesn’t
actually force any progress display by itself.
-q
This flag makes the command not to report its progress on the
standard error stream.
--no-reuse-delta
When creating a packed archive in a repository that has
existing packs, the command reuses existing deltas. This
sometimes results in a slightly suboptimal pack. This flag
tells the command not to reuse existing deltas but compute
them from scratch.
--no-reuse-object
This flag tells the command not to reuse existing object data
at all, including non deltified object, forcing recompression
of everything. This implies --no-reuse-delta. Useful only in
the obscure case where wholesale enforcement of a different
compression level on the packed data is desired.
--compression=<n>
Specifies compression level for newly-compressed data in the
generated pack. If not specified, pack compression level is
determined first by pack.compression, then by
core.compression, and defaults to -1, the zlib default, if
neither is set. Add --no-reuse-object if you want to force a
uniform compression level on all data no matter the source.
--[no-]sparse
Toggle the "sparse" algorithm to determine which objects to
include in the pack, when combined with the "--revs" option.
This algorithm only walks trees that appear in paths that
introduce new objects. This can have significant performance
benefits when computing a pack to send a small change.
However, it is possible that extra objects are added to the
pack-file if the included commits contain certain types of
direct renames. If this option is not included, it defaults
to the value of pack.useSparse, which is true unless
otherwise specified.
--thin
Create a "thin" pack by omitting the common objects between a
sender and a receiver in order to reduce network transfer.
This option only makes sense in conjunction with --stdout.
Note: A thin pack violates the packed archive format by
omitting required objects and is thus unusable by Git without
making it self-contained. Use git index-pack --fix-thin (see
git-index-pack(1)) to restore the self-contained property.
--shallow
Optimize a pack that will be provided to a client with a
shallow repository. This option, combined with --thin, can
result in a smaller pack at the cost of speed.
--delta-base-offset
A packed archive can express the base object of a delta as
either a 20-byte object name or as an offset in the stream,
but ancient versions of Git don’t understand the latter. By
default, git pack-objects only uses the former format for
better compatibility. This option allows the command to use
the latter format for compactness. Depending on the average
delta chain length, this option typically shrinks the
resulting packfile by 3-5 per-cent.
Note: Porcelain commands such as git gc (see git-gc(1)), git
repack (see git-repack(1)) pass this option by default in
modern Git when they put objects in your repository into pack
files. So does git bundle (see git-bundle(1)) when it creates
a bundle.
--threads=<n>
Specifies the number of threads to spawn when searching for
best delta matches. This requires that pack-objects be
compiled with pthreads otherwise this option is ignored with
a warning. This is meant to reduce packing time on
multiprocessor machines. The required amount of memory for
the delta search window is however multiplied by the number
of threads. Specifying 0 will cause Git to auto-detect the
number of CPU’s and set the number of threads accordingly.
--index-version=<version>[,<offset>]
This is intended to be used by the test suite only. It allows
to force the version for the generated pack index, and to
force 64-bit index entries on objects located above the given
offset.
--keep-true-parents
With this option, parents that are hidden by grafts are
packed nevertheless.
--filter=<filter-spec>
Omits certain objects (usually blobs) from the resulting
packfile. See git-rev-list(1) for valid <filter-spec> forms.
--no-filter
Turns off any previous --filter= argument.
--missing=<missing-action>
A debug option to help with future "partial clone"
development. This option specifies how missing objects are
handled.
The form --missing=error requests that pack-objects stop with
an error if a missing object is encountered. If the
repository is a partial clone, an attempt to fetch missing
objects will be made before declaring them missing. This is
the default action.
The form --missing=allow-any will allow object traversal to
continue if a missing object is encountered. No fetch of a
missing object will occur. Missing objects will silently be
omitted from the results.
The form --missing=allow-promisor is like allow-any, but will
only allow object traversal to continue for EXPECTED promisor
missing objects. No fetch of a missing object will occur. An
unexpected missing object will raise an error.
--exclude-promisor-objects
Omit objects that are known to be in the promisor remote.
(This option has the purpose of operating only on locally
created objects, so that when we repack, we still maintain a
distinction between locally created objects [without
.promisor] and objects from the promisor remote [with
.promisor].) This is used with partial clone.
--keep-unreachable
Objects unreachable from the refs in packs named with
--unpacked= option are added to the resulting pack, in
addition to the reachable objects that are not in packs
marked with *.keep files. This implies --revs.
--pack-loose-unreachable
Pack unreachable loose objects (and their loose counterparts
removed). This implies --revs.
--unpack-unreachable
Keep unreachable objects in loose form. This implies --revs.
--delta-islands
Restrict delta matches based on "islands". See DELTA ISLANDS
below.
When possible, pack-objects tries to reuse existing on-disk
deltas to avoid having to search for new ones on the fly. This is
an important optimization for serving fetches, because it means
the server can avoid inflating most objects at all and just send
the bytes directly from disk. This optimization can’t work when
an object is stored as a delta against a base which the receiver
does not have (and which we are not already sending). In that
case the server "breaks" the delta and has to find a new one,
which has a high CPU cost. Therefore it’s important for
performance that the set of objects in on-disk delta
relationships match what a client would fetch.
In a normal repository, this tends to work automatically. The
objects are mostly reachable from the branches and tags, and
that’s what clients fetch. Any deltas we find on the server are
likely to be between objects the client has or will have.
But in some repository setups, you may have several related but
separate groups of ref tips, with clients tending to fetch those
groups independently. For example, imagine that you are hosting
several "forks" of a repository in a single shared object store,
and letting clients view them as separate repositories through
GIT_NAMESPACE or separate repos using the alternates mechanism. A
naive repack may find that the optimal delta for an object is
against a base that is only found in another fork. But when a
client fetches, they will not have the base object, and we’ll
have to find a new delta on the fly.
A similar situation may exist if you have many refs outside of
refs/heads/ and refs/tags/ that point to related objects (e.g.,
refs/pull or refs/changes used by some hosting providers). By
default, clients fetch only heads and tags, and deltas against
objects found only in those other groups cannot be sent as-is.
Delta islands solve this problem by allowing you to group your
refs into distinct "islands". Pack-objects computes which objects
are reachable from which islands, and refuses to make a delta
from an object A against a base which is not present in all of
A's islands. This results in slightly larger packs (because we
miss some delta opportunities), but guarantees that a fetch of
one island will not have to recompute deltas on the fly due to
crossing island boundaries.
When repacking with delta islands the delta window tends to get
clogged with candidates that are forbidden by the config.
Repacking with a big --window helps (and doesn’t take as long as
it otherwise might because we can reject some object pairs based
on islands before doing any computation on the content).
Islands are configured via the pack.island option, which can be
specified multiple times. Each value is a left-anchored regular
expressions matching refnames. For example:
[pack]
island = refs/heads/
island = refs/tags/
puts heads and tags into an island (whose name is the empty
string; see below for more on naming). Any refs which do not
match those regular expressions (e.g., refs/pull/123) is not in
any island. Any object which is reachable only from refs/pull/
(but not heads or tags) is therefore not a candidate to be used
as a base for refs/heads/.
Refs are grouped into islands based on their "names", and two
regexes that produce the same name are considered to be in the
same island. The names are computed from the regexes by
concatenating any capture groups from the regex, with a - dash in
between. (And if there are no capture groups, then the name is
the empty string, as in the above example.) This allows you to
create arbitrary numbers of islands. Only up to 14 such capture
groups are supported though.
For example, imagine you store the refs for each fork in
refs/virtual/ID, where ID is a numeric identifier. You might then
configure:
[pack]
island = refs/virtual/([0-9]+)/heads/
island = refs/virtual/([0-9]+)/tags/
island = refs/virtual/([0-9]+)/(pull)/
That puts the heads and tags for each fork in their own island
(named "1234" or similar), and the pull refs for each go into
their own "1234-pull".
Note that we pick a single island for each regex to go into,
using "last one wins" ordering (which allows repo-specific config
to take precedence over user-wide config, and so forth).
Various configuration variables affect packing, see git-config(1)
(search for "pack" and "delta").
Notably, delta compression is not used on objects larger than the
core.bigFileThreshold configuration variable and on files with
the attribute delta set to false.
git-rev-list(1) git-repack(1) git-prune-packed(1)
Part of the git(1) suite
This page is part of the git (Git distributed version control
system) project. Information about the project can be found at
⟨http://git-scm.com/⟩. If you have a bug report for this manual
page, see ⟨http://git-scm.com/community⟩. This page was obtained
from the project's upstream Git repository
⟨https://github.com/git/git.git⟩ on 2024-06-14. (At that time,
the date of the most recent commit that was found in the
repository was 2024-06-12.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Git 2.45.2.492.gd63586 2024-06-12 GIT-PACK-OBJECTS(1)
Pages that refer to this page: git(1), git-bundle(1), git-config(1), git-gc(1), git-index-pack(1), git-pack-redundant(1), git-prune-packed(1), git-repack(1), git-rev-list(1), git-show-index(1), gitformat-pack(5)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|